Hammad Nazir

Dr Hammad Nazir

  • 01202 967221
  • hnazir at bournemouth dot ac dot uk
  • Post-Doctoral Research Fellow
  • Poole House P325, Talbot Campus, Fern Barrow, Poole, BH12 5BB
Back to top

Journal Articles

  • Khan, Z., Latif, J., Nazir, M.H., Saeed, A. and Stokes, K., 2018. Predictive and prognostic modelling and simulation of coatings subject to corrosion and mechanical failures. International Journal of Computational Methods and Experimental Measurements, 6 (3), 487-498.
  • Nazir, M.H., Khan, Z.A. and Saeed, A., 2017. A Novel Non-Destructive Sensing Technology for On-Site Field Electrochemical Impedance Testing of Coatings. IEEE Access.
  • Nazir, M.H., Khan, Z.A., Saeed, A., Bakolas, V., Braun, W., Bajwa, R. and Rafique, S., 2017. Analyzing and Modelling the Corrosion Behavior of Ni/Al2O3, Ni/SiC, Ni/ZrO2 and Ni/Graphene Nanocomposite Coatings. MATERIALS, 10 (11).
  • Nazir, M.H., Saeed, A. and Khan, Z., 2017. A comprehensive predictive corrosion model incorporating varying environmental gas pollutants applied to wider steel applications. MATERIALS CHEMISTRY AND PHYSICS, 193, 19-34.
  • Khan, Z.A., Chacko, V. and Nazir, H., 2017. A review of friction models in interacting joints for durability design. Friction, 5 (1).
  • Nazir, M.H. and Khan, Z.A., 2017. A review of theoretical analysis techniques for cracking and corrosive degradation of film-substrate systems. ENGINEERING FAILURE ANALYSIS, 72, 80-113.
  • Nazir, M.H., Khan, Z.A. and Stokes, K., 2016. Analysing the coupled effects of compressive and diffusion induced stresses on the nucleation and propagation of circular coating blisters in the presence of micro-cracks. ENGINEERING FAILURE ANALYSIS, 70, 1-15.
  • Bajwa, R., Khan, Z., Nazir, H., Chacko, V. and Saeed, A., 2016. Wear and Friction Properties of Electrodeposited Ni-Based Coatings Subject to Nano-enhanced Lubricant and Composite Coating. ACTA METALLURGICA SINICA-ENGLISH LETTERS, 29 (10), 902-910.
  • Saeed, A., Khan, Z.A. and Nazir, M.H., 2016. Time dependent surface corrosion analysis and modelling of automotive steel under a simplistic model of variations in environmental parameters. MATERIALS CHEMISTRY AND PHYSICS, 178, 65-73.
  • Nazir, H., Khan, Z. and Stokes, K., 2016. Modelling the Coupling Effects of Residual and Diffusion Induced Stresses on the Nucleation and Propagation of Circular Coating Blisters in the Presence of Coating Micro-cracks. Surface Science Reports.
  • Khan, Z., Pashaei, P., Bajwa, R., Nazir, H. and Cakmak, M., 2016. Fabrication and characterisation of electropdeposited and magnertron-sputtered thin films. International Journal of Computational Methods & Experimental Measurements, 3 (2), 165-174.
  • Nazir, M.H., Khan, Z.A., Saeed, A. and Stokes, K., 2016. A predictive model for life assessment of automotive exhaust mufflers subject to internal corrosion failure due to exhaust gas condensation. ENGINEERING FAILURE ANALYSIS, 63, 43-60.
  • Nazir, M.H., Khan, Z.A., Saeed, A. and Stokes, K., 2016. A model for cathodic blister growth in coating degradation using mesomechanics approach. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 67 (5), 495-503.
  • Nazir, M.H., Khan, Z.A., Saeed, A. and Stokes, K., 2016. Modeling the Effect of Residual and Diffusion-Induced Stresses on Corrosion at the Interface of Coating and Substrate. CORROSION, 72 (4), 500-517.
  • Nazir, H. and Khan, Z., 2016. Maximising the interfacial toughness of thin coatings and substrate through optimisation of defined parapmeters. International Journal of Computational Methods & Experimental Measurements, 3 (4), 316-328.
  • Saeed, A., Khan, Z.A. and Nazir, M.H., 2015. An Optimised Approach of Protecting and Sustaining Large Vehicle System. SUSTAINABILITY, 7 (12), 16451-16464.
  • Nazir, M.H., Khan, Z.A. and Stokes, K., 2015. A holistic mathematical modelling and simulation for cathodic delamination mechanism - a novel and an efficient approach. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 29 (22), 2475-2513.
  • Nazir, M.H., Khan, Z.A. and Stokes, K., 2015. Optimisation of interface roughness and coating thickness to maximise coating-substrate adhesion - a failure prediction and reliability assessment modelling. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 29 (14), 1415-1445.
  • Nazir, M.H., Khan, Z.A. and Stokes, K., 2015. A unified mathematical modelling and simulation for cathodic blistering mechanism incorporating diffusion and fracture mechanics concepts. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 29 (12), 1200-1228.
  • Nazir, M.H., Khan, Z. and Stokes, K., 2015. Modelling of metal-coating delamination incorporating variable environmental parameters. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 29 (5), 392-423.
  • Nazir, M.H., Khan, Z.A. and Stokes, K., 2015. A holistic mathematical modelling and simulation for cathodic delamination mechanism - A novel and an efficient approach. Journal of Adhesion Science and Technology, 29 (22), 2475-2513.

Chapters

  • Khan, Grover, M. and Nazir, M.H., 2014. The comparison on tool wear, surface finish and geometric accuracy when turning EN8 steel in wet and dry conditions. In: Gi-Chul Yang, Sio-Iong Ao, Len Gelman, ed. Transactions on Engineering Technologies: World Congress on Engineering. Springer.

Conferences

  • Nazir, M.H. and Khan, Z., 2018. Development of a Mechano-Electrochemical Model for Prognostics of Nano-Composite Coatings Subject to Corrosion Failures. In: 73rd STLE Annual Meeting & Exhibition 20-24 May 2018 Minneapolis, Minnesota (USA). USA: ScholarOne.
  • Khan, Z. and Nazir, M.H., 2018. Development of a Mechano-Wear Model for Prognostics of Nano-Composite Coatings Subject to the Reciprocating Wear Failures. In: 73rd STLE Annual Meeting & Exhibition 20-24 May 2018 Minneapolis, Minnesota (USA). USA: ScholarOne.
  • Nazir, M.H. and Khan, Z., 2018. Development of a Synergetic Wear-Corrosion Model for Prognostics of Nano-Composite Coatings Subject to Tribo-Corrosion Failures. In: 73rd STLE Annual Meeting & Exhibition 20-24 May 2018 Minneapolis, Minnesota (USA). USA: ScholarOne.
  • Khan, Z., Nazir, M.H., Saeed, A., Stokes, K., Bajwa, R., Bakolas, V., Braun, W. and Pashaei, P., 2017. Development of novel nano-coatings through experimental techniques, mathematical modelling and simulation. In: International Symposium on Advanced Materials 16-20 October 2017 Islamabad, Pakistan. Islamabad: ISAM.
  • Khan, Z., Latif, J., Nazir, H., Stokes, K. and Plummer, J., 2017. Sensor based corrosion condition monitoring of coating substrate system informed by fracture mechanics, electrochemistry and heat transfer concepts. In: Department of Defense - Allied Nations Technical Corrosion Conference. 7-10 August 2017 Birmingham, AL, USA. https://www.corrdefense.org/Default.aspx, 1-9.
  • Khan, Z., Latif, J., Nazir, H., Saeed, A. and Stokes, K., 2017. Predictive and prognostic modelling and simulation of coating failures due to corrosion and mechanical failures. In: Materials Characterisation 2017 8th International Conference on Computational Methods and Experiments in Material and Contact Characterisation 21-23 June 2017 Tallinn, Estonia. Wessex Institute of Technology.
  • Nazir, M.H. and Khan, Z., 2017. An experimental study and modelling of tribo-corrosion behaviour of Ni-Graphene nano composite coatings for industrial applications. In: Society of Tribologists and Lubrication Engineers International Conference 21-25 May 2017 Atlanta, Georgia USA. USA: Society of Tribologists & Lubrication Engineers.
  • Khan, Z. and Nazir, H., 2016. Computational Wear and Corrosion Evaluation of Novel Coatings for Automotive and Aerospace Applications. In: Society of Tribologists & Lubrication Engineers STLE 71st Annual Meeting and Exhibition 15-19 May 2016 Las Vegas, USA. STLE.
  • Saeed, A., Nazir, H. and Khan, Z., 2016. A Study of the Surface Durability of Waste-gated Turbocharger End Links. In: Society of Tribologists & Lubrication Engineers STLE 71st Annual Meeting and Exhibition 15 September-19 May 2016 Las Vegas, USA. STLE.
  • Saeed, A., Khan, Z., Nazir, H., Hadfield, M. and Smith, R., 2016. An impact study of the research conducted to conserve large military vehicles within the context of sustainability. In: Defence Heritage 2016 4-6 May 2016 Alicante, Spain. WIT Presss.
  • Saeed, A., Khan, Z., Nazir, H., Hadfield, M. and Smith, R., 2016. Research Impact of Conserving Large Military Vehicles through a Sustainable Methodology. In: Defence Heritage 2016 4-6 May 2016 Alicante, Spain.
  • Nazir, H. and Khan, Z., 2015. Structural health monitoring with failure prediction, optimisation and prognostic applications. In: Top of the line corrosion conference 2015 27-29 July 2015 Jakarta, Indonesia. NACE.
  • Khan, Z. and Nazir, M.H., 2015. Maximising the Interfacial Fracture Toughness of Thin Coatings and Substrate through Optimisation of Defined Parameters. In: Contact and Surface 2015 20-24 April 2015 València, Spain. WIT.
  • Khan, Z., Nazir, M.H. and Stokes, K., 2015. Maximising the Interfacial Fracture Toughness of Thin Coatings and Substrate through Optimisation of Defined Parameters. In: Contact and Surface 2015 17 May-23 April 2015 València, Spain.
  • Khan, Z., Pashaei, P., Bajwa, R., Nazir, M.H. and Cakmak, M., 2015. Fabrication and characterisation of electrodeposited and magnetron sputtered thin films. In: Contact and Surface 2015 21-23 April 2015 València, Spain.
  • Nazir, M.H., Khan, Z. and Stokes, K., 2015. OPTIMISATION OF INTERFACE ROUGHNESS AND COATING THICKNESS TO MAXIMISE COATING-SUBSTRATE ADHESION. 311-314.
  • Nazir, M.H. and Khan, Z., 2015. The development of a sensors based technology for remote monitoring, prediction and optimisation of structural failure parameters. 1639.
  • Nazir, H. and Khan, Z., 2014. Adhesive Threshold Predictive Modelling for Coatings in the Presence of Interfacial Impurity. In: ngineering Mechanics Institute Conference 16-19 June 2015 Stanford University, USA.
  • Grover, M. and Khan, Z.A., 2014. The comparison on tool wear, surface finish and geometric accuracy when turning EN8 steel in wet and dry conditions. 1093-1097.

Reports

  • Nazir, M.H. and Khan, Z.A., 2017. Post-Doctoral Project Report "Modelling & Development of Novel Sustainable Thermo-fluids". BU.

Theses

  • Nazir, M.H., 2016. In-situ corrosion health monitoring and prediction in miltary vehicles. PhD Thesis. Bournemouth University, Faculty of Science and Technology.
The data on this page was last updated at 04:04 on January 22, 2018.