Tribological Characterisation of Graphene Oxide as Lubricant Additive on Hypereutectic Al-25Si/Steel Tribopair
Authors: Kumar, P. and Wani, M.F.
Journal: Tribology Transactions
Volume: 61
Issue: 2
Pages: 335-346
eISSN: 1547-397X
ISSN: 1040-2004
DOI: 10.1080/10402004.2017.1322735
Abstract:The performance of a lubricant greatly depends on the additives it involves. However, recently used additives produce severe pollution when they are burned and exhausted. Therefore, it is necessary to develop a new generation of green additives. Graphene oxide (GO) is considered to be environmentally friendly. The scope of this study is to explore the fundamental tribological behavior of graphene, the first existing 2D material, and evaluate its performance as a lubricant additive. The friction and wear behavior of 0.5 wt% concentrations of GO particles in ethanol and SAE20W50 engine oil on a hypereutectic Al-25Si alloy disc against steel ball was studied at 5 N load. GO as an additive reduced the wear coefficient by 60–80% with 30 Hz frequency for 120 m sliding distance. The minimum value of the coefficient of friction (0.057) was found with SAE20W50 + 0.5 wt% GO. A possible explanation for these results is that the graphene layers act as a 2D nanomaterial and form a conformal protective film on the sliding contact interfaces and easily shear off due to weak Van der Waal's forces and drastically reduce the wear. Scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and Raman spectroscopy were used for characterization of GO and wear scars.
https://eprints.bournemouth.ac.uk/29455/
Source: Scopus
Tribological Characterisation of Graphene Oxide as Lubricant Additive on Hypereutectic Al-25Si/Steel Tribopair
Authors: Kumar, P. and Wani, M.F.
Journal: TRIBOLOGY TRANSACTIONS
Volume: 61
Issue: 2
Pages: 335-346
eISSN: 1547-397X
ISSN: 1040-2004
DOI: 10.1080/10402004.2017.1322735
https://eprints.bournemouth.ac.uk/29455/
Source: Web of Science (Lite)
Tribological Characterisation of Graphene Oxide as Lubricant Additive on Hypereutectic Al-25Si/Steel Tribopair
Authors: Kumar, P. and Wani, M.F.
Journal: Tribology Transactions
Volume: 61
Issue: 2
Pages: 335-346
ISSN: 1040-2004
Abstract:The performance of a lubricant greatly depends on the additives it involves. However, recently used additives produce severe pollution when they are burned and exhausted. Therefore, it is necessary to develop a new generation of green additives. Graphene oxide (GO) is considered to be environmentally friendly. The scope of this study is to explore the fundamental tribological behavior of graphene, the first existing 2D material, and evaluate its performance as a lubricant additive. The friction and wear behavior of 0.5 wt% concentrations of GO particles in ethanol and SAE20W50 engine oil on a hypereutectic Al-25Si alloy disc against steel ball was studied at 5 N load. GO as an additive reduced the wear coefficient by 60–80% with 30 Hz frequency for 120 m sliding distance. The minimum value of the coefficient of friction (0.057) was found with SAE20W50 + 0.5 wt% GO. A possible explanation for these results is that the graphene layers act as a 2D nanomaterial and form a conformal protective film on the sliding contact interfaces and easily shear off due to weak Van der Waal's forces and drastically reduce the wear. Scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and Raman spectroscopy were used for characterization of GO and wear scars.
https://eprints.bournemouth.ac.uk/29455/
Source: BURO EPrints