Thermal Stability of an Mg–Nd Alloy Processed by High-Pressure Torsion
Authors: Tighiouaret, S., Lachhab, R., Hanna, A., Azzeddine, H., Huang, Y., Baudin, T., Helbert, A.L., Brisset, F., Bradai, D. and Langdon, T.G.
Journal: Advanced Engineering Materials
Volume: 21
Issue: 12
eISSN: 1527-2648
ISSN: 1438-1656
DOI: 10.1002/adem.201900801
Abstract:The evolution of microstructure, texture, and mechanical properties of an Mg–1.43Nd (wt%) alloy is investigated after processing by high-pressure torsion at room temperature through five turns and isochronal annealing for 1 h at 150, 250, 350, and 450 °C using electron backscatter diffraction and Vickers microhardness. The alloy exhibits a good thermal stability up to annealing at 250 °C, with mean grain size of ≈0.65 μm. The microhardness shows an initial hardening after annealing at 150 °C and then a subsequent softening. The deformation texture, a basal texture shifted 60° away from the shear direction (SD), is retained during annealing up to 250 °C. In contrast, a basal texture with symmetrical splitting toward SD is developed after annealing at 350 °C. The precipitation sequence and their pinning effects are responsible for the age-hardening, stabilization of grain size, and the texture modification. The kinetics of grain growth in the Mg–1.43Nd alloy follows two stages depending on the temperature annealing range, with an activation energy of ≈26 kJ mol−1 in the low temperature range of 150–250 °C and ≈147 kJ mol−1 in the high temperature range of 250–450 °C.
https://eprints.bournemouth.ac.uk/32704/
Source: Scopus
Thermal Stability of an Mg-Nd Alloy Processed by High-Pressure Torsion
Authors: Tighiouaret, S., Lachhab, R., Hanna, A., Azzeddine, H., Huang, Y., Baudin, T., Helbert, A.-L., Brisset, F., Bradai, D. and Langdon, T.G.
Journal: ADVANCED ENGINEERING MATERIALS
Volume: 21
Issue: 12
eISSN: 1527-2648
ISSN: 1438-1656
DOI: 10.1002/adem.201900801
https://eprints.bournemouth.ac.uk/32704/
Source: Web of Science (Lite)
Thermal Stability of an Mg‐Nd Alloy Processed by High‐Pressure Torsion
Authors: Tighiouaret, S., Lachhab, R., Hanna, A., Azzeddine, H., Huang, Y., Baudin, T., Helbert, A.-L., Brisset, F., Bradai, D. and Langdon, T.G.
Journal: Advanced Engineering Materials
Volume: 21
Issue: 12
Pages: 1900801(1)-1900801(11)
Publisher: Wiley-Blackwell
ISSN: 1438-1656
DOI: 10.1002/adem.201900801
Abstract:The evolution of microstructure, texture and mechanical properties of an Mg‐1.43Nd (wt.%) alloy are investigated after processing by high‐pressure torsion at room temperature through 5 turns and isochronal annealing for 1 h at 150, 250, 350 and 450 °C using Electron BackScatter Diffraction and Vickers microhardness. The alloy exhibits a good thermal stability up to an annealing at 250 °C, with mean grain size of ≈0.65 μm. The microhardness shows an initial hardening after annealing at 150 °C and then a subsequent softening. The deformation texture, a basal texture shifted 60° away from the shear direction (SD), is retained during annealing up to 250 °C. By contrast, a basal texture with symmetrical splitting towards SD is developed after annealing at 350 °C. The precipitation sequence and their pinning effect are responsible for the age‐hardening, stabilization of grain size and the texture modification. The kinetics of grain growth in the Mg‐1.43Nd alloy follows two stages depending on the temperature annealing range, with an activation energy of ≈26 kJ/mol in the low temperature range of 150–250 °C and ~147 kJ/mol in the high temperature range of 250–450 °C.
https://eprints.bournemouth.ac.uk/32704/
Source: Manual
Preferred by: Yi Huang
Thermal Stability of an Mg‐Nd Alloy Processed by High‐Pressure Torsion
Authors: Tighiouaret, S., Lachhab, R., Hanna, A., Azzeddine, H., Huang, Y., Baudin, T., Helbert, A.-L., Brisset, F., Bradai, D. and Langdon, T.G.
Journal: Advanced Engineering Materials
Volume: 21
Issue: 12
ISSN: 1438-1656
Abstract:The evolution of microstructure, texture and mechanical properties of an Mg‐1.43Nd (wt.%) alloy are investigated after processing by high‐pressure torsion at room temperature through 5 turns and isochronal annealing for 1 h at 150, 250, 350 and 450 °C using Electron BackScatter Diffraction and Vickers microhardness. The alloy exhibits a good thermal stability up to an annealing at 250 °C, with mean grain size of ≈0.65 μm. The microhardness shows an initial hardening after annealing at 150 °C and then a subsequent softening. The deformation texture, a basal texture shifted 60° away from the shear direction (SD), is retained during annealing up to 250 °C. By contrast, a basal texture with symmetrical splitting towards SD is developed after annealing at 350 °C. The precipitation sequence and their pinning effect are responsible for the age‐hardening, stabilization of grain size and the texture modification. The kinetics of grain growth in the Mg‐1.43Nd alloy follows two stages depending on the temperature annealing range, with an activation energy of ≈26 kJ/mol in the low temperature range of 150–250 °C and ~147 kJ/mol in the high temperature range of 250–450 °C.
https://eprints.bournemouth.ac.uk/32704/
Source: BURO EPrints