Achieving superplasticity in fine-grained Al-Mg-Sc alloys
Authors: Pereira, P.H.R., Huang, Y., Kawasaki, M. and Langdon, T.G.
Journal: Materials Science Forum
Volume: 1016 MSF
Pages: 11-17
eISSN: 1662-9752
ISSN: 0255-5476
DOI: 10.4028/www.scientific.net/MSF.1016.11
Abstract:Superplasticity denotes the ability of a limited number of materials to achieve exceptionally high tensile elongations of at least 400%. Experiments show that the Al-Mg-Sc alloys provide excellent capabilities for achieving superplastic flow and also they can be formed easily in biaxial superplastic forming operations. It is important, therefore, to examine the superplastic flow mechanism when the alloy is prepared using different procedures. This report examines the superplastic characteristics of these alloys after preparation without subjecting to any severe plastic deformation (SPD), after processing using the two SPD procedures of equal-channel angular pressing (ECAP) and high-pressure torsion (HPT) and after processing using the alternative procedure of friction stir processing (FSP). The results are compared using each technique and they are examined with reference to a theoretical model that was developed specifically for superplastic flow in conventional alloys.
https://eprints.bournemouth.ac.uk/33881/
Source: Scopus
Achieving superplasticity in fine-grained Al-Mg-Sc alloys
Authors: Pereira, P.H.R., Huang, Y., Kawasaki, M. and Langdon, T.G.
Journal: Materials Science Forum
Volume: 1016
Pages: 11-17
Publisher: Trans Tech Publications Ltd.
ISSN: 0255-5476
Abstract:Superplasticity denotes the ability of a limited number of materials to achieve exceptionally high tensile elongations of at least 400%. Experiments show that the Al-Mg-Sc alloys provide excellent capabilities for achieving superplastic flow and also they can be formed easily in biaxial superplastic forming operations. It is important, therefore, to examine the superplastic flow mechanism when the alloy is prepared using different procedures. This report examines the superplastic characteristics of these alloys after preparation without subjecting to any severe plastic deformation (SPD), after processing using the two SPD procedures of equal-channel angular pressing (ECAP) and high-pressure torsion (HPT) and after processing using the alternative procedure of friction stir processing (FSP). The results are compared using each technique and they are examined with reference to a theoretical model that was developed specifically for superplastic flow in conventional alloys.
https://eprints.bournemouth.ac.uk/33881/
Source: Manual
Achieving superplasticity in fine-grained Al-Mg-Sc alloys
Authors: Pereira, P.H.R., Huang, Y., Kawasaki, M. and Langdon, T.G.
Publisher: https://www.tugraz.at/events/thermec-2020/home/
ISSN: 0255-5476
Abstract:Superplasticity denotes the ability of a limited number of materials to achieve exceptionally high tensile elongations of at least 400%. Experiments show that the Al-Mg-Sc alloys provide excellent capabilities for achieving superplastic flow and also they can be formed easily in biaxial superplastic forming operations. It is important, therefore, to examine the superplastic flow mechanism when the alloy is prepared using different procedures. This report examines the superplastic characteristics of these alloys after preparation without subjecting to any severe plastic deformation (SPD), after processing using the two SPD procedures of equal-channel angular pressing (ECAP) and high-pressure torsion (HPT) and after processing using the alternative procedure of friction stir processing (FSP). The results are compared using each technique and they are examined with reference to a theoretical model that was developed specifically for superplastic flow in conventional alloys.
https://eprints.bournemouth.ac.uk/33881/
https://www.scientific.net/MSF
Source: BURO EPrints