Microstructural and hardness evolution in a duplex stainless steel processed by high-pressure torsion
Authors: Ma, M., Ding, H., Huang, Y., Tian, C.W. and Langdon, T.G.
Journal: Crystals
Volume: 10
Issue: 12
Pages: 1-11
eISSN: 2073-4352
DOI: 10.3390/cryst10121138
Abstract:The duplex stainless steel 2205, designated DSS2205 and having a duplex structure comprising ferrite and austenite phases, was processed by high-pressure torsion (HPT) and the microstructural and hardness evolutions were investigated after various HPT revolutions and at different positions within the specimens. The results show that the grain refinement induced by severe deformation processing is different in the ferrite and austenite phases such that the ferrite grains are refined via dislocation subdivision, whereas grain refinement in the austenite phase depends mainly on the interaction of dislocations and twin boundaries at relatively low strains. When the numbers of revolutions increases, the grain refinement in austenite restricts the occurrence of deformation twinning so that dislocation slip becomes dominant. During HPT processing, the effect of the phase boundaries on the mechanical properties of the alloy is very significant. The results show the average width between two adjacent phases and the hardness of the alloy are generally consistent with the classical Hall–Petch relationship.
https://eprints.bournemouth.ac.uk/34952/
Source: Scopus
Microstructural and Hardness Evolution in a Duplex Stainless Steel Processed by High-Pressure Torsion
Authors: Ma, M., Ding, H., Huang, Y., Tian, C.W. and Langdon, T.G.
Journal: CRYSTALS
Volume: 10
Issue: 12
ISSN: 2073-4352
DOI: 10.3390/cryst10121138
https://eprints.bournemouth.ac.uk/34952/
Source: Web of Science (Lite)
Microstructural and hardness evolution in a duplex stainless steel processed by high-pressure torsion
Authors: Ma, M., Ding, H., Huang, Y., Tian, C.W. and Langdon, T.G.
Journal: Crystals
Volume: 10
Issue: 12
Pages: 1138(1)-1138(11)
Publisher: MDPI AG
ISSN: 2073-4352
DOI: 10.3390/cryst10121138
Abstract:A duplex stainless steel 2205, designated DSS2205 and having a duplex structure comprising ferrite and austenite phases, was processed by high-pressure torsion (HPT) and the microstructural and hardness evolutions were investigated after various HPT revolutions and at different positions within the specimens. The results show that the grain refinement induced by severe deformation processing is different in the ferrite and austenite phases such that the ferrite grains are refined via dislocation subdivision whereas grain refinement in the austenite phase depends mainly on the interaction of dislocations and twin boundaries at relatively low strains. When the numbers of revolutions increases, the grain refinement in austenite restricts the occurrence of deformation twinning so that dislocation slip becomes dominant. During HPT processing, the effect of the phase boundaries on the mechanical properties of the alloy is very significant. The results show the average width between two adjacent phases and the hardness of the alloy are generally consistent with the classical Hall-Petch relationship.
https://eprints.bournemouth.ac.uk/34952/
Source: Manual
Microstructural and hardness evolution in a duplex stainless steel processed by high-pressure torsion
Authors: Ma, M., Ding, H., Huang, Y., Tian, C.W. and Langdon, T.G.
Journal: Crystals
Volume: 10
Issue: 12
ISSN: 2073-4352
Abstract:A duplex stainless steel 2205, designated DSS2205 and having a duplex structure comprising ferrite and austenite phases, was processed by high-pressure torsion (HPT) and the microstructural and hardness evolutions were investigated after various HPT revolutions and at different positions within the specimens. The results show that the grain refinement induced by severe deformation processing is different in the ferrite and austenite phases such that the ferrite grains are refined via dislocation subdivision whereas grain refinement in the austenite phase depends mainly on the interaction of dislocations and twin boundaries at relatively low strains. When the numbers of revolutions increases, the grain refinement in austenite restricts the occurrence of deformation twinning so that dislocation slip becomes dominant. During HPT processing, the effect of the phase boundaries on the mechanical properties of the alloy is very significant. The results show the average width between two adjacent phases and the hardness of the alloy are generally consistent with the classical Hall-Petch relationship.
https://eprints.bournemouth.ac.uk/34952/
Source: BURO EPrints