Fabrication of hybrid nanocrystalline Al–Ti alloys by mechanical bonding through high-pressure torsion
Authors: Bazarnik, P., Bartkowska, A., Huang, Y., Szlązak, K., Adamczyk-Cieślak, B., Sort, J., Lewandowska, M. and Langdon, T.G.
Journal: Materials Science and Engineering: A
Volume: 833
ISSN: 0921-5093
DOI: 10.1016/j.msea.2021.142549
Abstract:This study demonstrates an approach of utilizing high-pressure torsion (HPT) to fabricate a novel hybrid material by the direct bonding of Al and Ti disks at room temperature under a compressive pressure of 6.0 GPa and with increasing numbers of HPT turns up to 50. Detailed structural observations revealed the formation of a multi-layered nanostructure in the edge regions of the disks with a grain size of ∼30 nm. X-ray diffraction (XRD) and selected area electron diffraction (SAED) confirmed the presence of three intermetallic compounds, AlTi, Al3Ti and Ti3Al, in the layered structures. Processing by HPT led to the formation of a hybrid nanocomposite with exceptional hardness (over 300 Hv) in the edge regions of the disks. Special emphasis was placed on understanding the evolution of hardness in the hybrid material. The investigation demonstrates a significant opportunity for using HPT processing to deepen the knowledge on diffusion bonding and mechanical joining technologies as well as for fabricating new and valuable hybrid nanomaterials.
https://eprints.bournemouth.ac.uk/36414/
Source: Scopus
Fabrication of hybrid nanocrystalline Al-Ti alloys by mechanical bonding through high-pressure torsion
Authors: Bazarnik, P., Bartkowska, A., Huang, Y., Szlazak, K., Adamczyk-Cieslak, B., Sort, J., Lewandowska, M. and Langdon, T.G.
Journal: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Volume: 833
eISSN: 1873-4936
ISSN: 0921-5093
DOI: 10.1016/j.msea.2021.142549
https://eprints.bournemouth.ac.uk/36414/
Source: Web of Science (Lite)
Fabrication of hybrid nanocrystalline Al-Ti alloys by mechanical bonding through high-pressure torsion
Authors: Bazarnik, P., Bartkowska, A., Huang, Y., Szlązak, K., Adamczyk-Cieślak, B., Sort, J., Lewandowska, M. and Langdon, T.G.
Journal: Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
Volume: 833
Pages: 142549(1)-142549(11)
Publisher: Elsevier
ISSN: 0921-5093
DOI: 10.1016/j.msea.2021.142549
Abstract:This study demonstrates an approach of utilizing high-pressure torsion (HPT) to fabricate a novel hybrid material by the direct bonding of Al and Ti disks at room temperature under a compressive pressure of 6.0 GPa and with increasing numbers of HPT turns up to 50. Detailed structural observations revealed the formation of a multi-layered nanostructure in the edge regions of the disks with a grain size of ~30 nm. X-ray diffraction (XRD) and selected area electron diffraction (SAED) confirmed the presence of three intermetallic compounds, AlTi, Al3Ti and Ti3Al, in the layered structures. Processing by HPT led to the formation of a hybrid nanocomposite with exceptional hardness (over 300 Hv) in the edge regions of the disks. Special emphasis was placed on understanding the evolution of hardness in the hybrid material. The investigation demonstrates a significant opportunity for using HPT processing to deepen the knowledge on diffusion bonding and mechanical joining technologies as well as for fabricating new and valuable hybrid nanomaterials.
https://eprints.bournemouth.ac.uk/36414/
Source: Manual
Preferred by: Yi Huang
Fabrication of hybrid nanocrystalline Al-Ti alloys by mechanical bonding through high-pressure torsion
Authors: Bazarnik, P., Bartkowska, A., Huang, Y., Szlązak, K., Adamczyk-Cieślak, B., Sort, J., Lewandowska, M. and Langdon, T.G.
Journal: Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
Volume: 833
ISSN: 0921-5093
Abstract:This study demonstrates an approach of utilizing high-pressure torsion (HPT) to fabricate a novel hybrid material by the direct bonding of Al and Ti disks at room temperature under a compressive pressure of 6.0 GPa and with increasing numbers of HPT turns up to 50. Detailed structural observations revealed the formation of a multi-layered nanostructure in the edge regions of the disks with a grain size of ~30 nm. X-ray diffraction (XRD) and selected area electron diffraction (SAED) confirmed the presence of three intermetallic compounds, AlTi, Al3Ti and Ti3Al, in the layered structures. Processing by HPT led to the formation of a hybrid nanocomposite with exceptional hardness (over 300 Hv) in the edge regions of the disks. Special emphasis was placed on understanding the evolution of hardness in the hybrid material. The investigation demonstrates a significant opportunity for using HPT processing to deepen the knowledge on diffusion bonding and mechanical joining technologies as well as for fabricating new and valuable hybrid nanomaterials.
https://eprints.bournemouth.ac.uk/36414/
Source: BURO EPrints