The role of processing temperature for achieving superplastic properties in an Al-3Mg-0.2Sc alloy processed by high-pressure torsion
Authors: Pereira, P.H.R., Bazarnik, P., Huang, Y., Lewandowska, M. and Langdon, T.G.
Journal: Materials Science and Engineering A
Volume: 916
ISSN: 0921-5093
DOI: 10.1016/j.msea.2024.147320
Abstract:Experiments were conducted to systematically assess the superplastic properties and the microstructural changes of an Al-3Mg-0.2Sc alloy processed by 10 HPT revolutions at room temperature (RT ≈ 300 K) or at 450 K after subsequent tensile testing at temperatures from 473 to 723 K over a wide range of strain rates. The HPT processing at RT led to the development of elongated grains with an average size of ∼140 nm whereas the grain structures were equiaxed and slightly larger (∼150 nm) after HPT at 450 K. After HPT processing at RT, the Al-Mg-Sc alloy exhibited true superplastic flow at low homologous temperatures and attained a maximum elongation of ∼850 % at 523 K. Nevertheless, the elongations decreased at temperatures T ≥ 623 K and an elongation higher than 400 % was only achieved at 673 K for a strain rate of ε˙ = 4.5 × 10−3 s−1. The material processed by HPT at 450 K displayed superior microstructural stability and substantially higher superplastic ductilities. Elongations of >1100 % were attained at 673 K for strain rates from 3.3 × 10−4 to 1.0 × 10−1 s−1 and a record elongation of ∼1880 % for an HPT-processed metal was achieved at 1.5 × 10−2 s−1 at 673 K. High strain rate superplasticity was also reached for an extended range of temperatures and strain rates. Analysis of the data confirms a stress exponent of ∼2 which is consistent with superplastic flow by grain boundary sliding accommodated by dislocation glide and climb.
https://eprints.bournemouth.ac.uk/40381/
Source: Scopus
The role of processing temperature for achieving superplastic properties in an Al-3Mg-0.2Sc alloy processed by high-pressure torsion
Authors: Pereira, P.H.R., Bazarnik, P., Huang, Y., Lewandowska, M. and Langdon, T.G.
Journal: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Volume: 916
eISSN: 1873-4936
ISSN: 0921-5093
DOI: 10.1016/j.msea.2024.147320
https://eprints.bournemouth.ac.uk/40381/
Source: Web of Science (Lite)
The role of processing temperature for achieving superplastic properties in an Al-3Mg-0.2Sc alloy processed by high-pressure torsion
Authors: Pereira, P.H.R., Bazarnik, P., Huang, Y., Lewandowska, M. and Langdon, T.G.
Journal: Materials Science & Engineering: A
Volume: 916
Pages: 147320(1)-147320(14)
Publisher: Elsevier
eISSN: 1873-4936
ISSN: 0921-5093
DOI: 10.1016/j.msea.2024.147320
Abstract:Experiments were conducted to systematically assess the superplastic properties and the microstructural changes of an Al-3Mg-0.2Sc alloy processed by 10 HPT revolutions at room temperature (RT ≈ 300 K) or at 450 K after subsequent tensile testing at temperatures from 473 to 723 K over a wide range of strain rates. The HPT processing at RT led to the development of elongated grains with an average size of ~140 nm whereas the grain structures were equiaxed and slightly larger (~150 nm) after HPT at 450 K. After HPT processing at RT, the Al-Mg-Sc alloy exhibited true superplastic flow at low homologous temperatures and attained a maximum elongation of ~850 % at 523 K. Nevertheless, the elongations decreased at temperatures T ≥ 623 K and an elongation higher than 400 % was only achieved at 673 K for a strain rate of ε ̇ = 4.5 x 10-3 s-1. The material processed by HPT at 450 K displayed superior microstructural stability and substantially higher superplastic ductilities. Elongations of > 1100 % were attained at 673 K for strain rates from 3.3 x 10-4 to 1.0 x 10-1 s-1 and a record elongation of ~1880 % for an HPT-processed metal was achieved at 1.5 x 10-2 s-1 at 673 K. High strain rate superplasticity was also reached for an extended range of temperatures and strain rates. Analysis of the data confirms a stress exponent of ~2 which is consistent with superplastic flow by grain boundary sliding accommodated by dislocation glide and climb.
https://eprints.bournemouth.ac.uk/40381/
Source: Manual
Preferred by: Yi Huang
The role of processing temperature for achieving superplastic properties in an Al-3Mg-0.2Sc alloy processed by high-pressure torsion
Authors: Pereira, P.H.R., Bazarnik, P., Huang, Y., Lewandowska, M. and Langdon, T.G.
Journal: Materials Science & Engineering: A
Volume: 916
Publisher: Elsevier
ISSN: 0921-5093
Abstract:Experiments were conducted to systematically assess the superplastic properties and the microstructural changes of an Al-3Mg-0.2Sc alloy processed by 10 HPT revolutions at room temperature (RT ≈ 300 K) or at 450 K after subsequent tensile testing at temperatures from 473 to 723 K over a wide range of strain rates. The HPT processing at RT led to the development of elongated grains with an average size of ~140 nm whereas the grain structures were equiaxed and slightly larger (~150 nm) after HPT at 450 K. After HPT processing at RT, the Al-Mg-Sc alloy exhibited true superplastic flow at low homologous temperatures and attained a maximum elongation of ~850 % at 523 K. Nevertheless, the elongations decreased at temperatures T ≥ 623 K and an elongation higher than 400 % was only achieved at 673 K for a strain rate of ε ̇ = 4.5 x 10-3 s-1. The material processed by HPT at 450 K displayed superior microstructural stability and substantially higher superplastic ductilities. Elongations of > 1100 % were attained at 673 K for strain rates from 3.3 x 10-4 to 1.0 x 10-1 s-1 and a record elongation of ~1880 % for an HPT-processed metal was achieved at 1.5 x 10-2 s-1 at 673 K. High strain rate superplasticity was also reached for an extended range of temperatures and strain rates. Analysis of the data confirms a stress exponent of ~2 which is consistent with superplastic flow by grain boundary sliding accommodated by dislocation glide and climb.
https://eprints.bournemouth.ac.uk/40381/
Source: BURO EPrints