Mitigating the adverse effects of free machining on the wear behaviour of large strain extrusion machined Brass260 alloy

Authors: Dhiman, M., Mittal, A., Huang, Y., Yadav, P.C.

Journal: Tribology International

Publication Date: 01/03/2027

Volume: 227

ISSN: 0301-679X

DOI: 10.1016/j.triboint.2026.112854

Abstract:

Conventional or free machining (FM) of Brass260 alloy typically causes inhomogeneous deformation, localized strain, and surface flaws that lower its scratch resistance. This research addresses these deficiencies by using Large Strain Extrusion Machining (LSEM), a heavy plastic deformation method designed to homogenize strain and refine the alloy's microstructure. The study evaluates the scratch and friction response of solution-annealed (SA), free machining (FM), and large strain extrusion machining (LSEM)-treated ultrafine-grained Brass260 sheets/laminates. Micro-scratch evaluations were performed under a progressive load ranging from 20 to 40 N. The findings indicate that LSEM processing substantially elevates scratch resistance and surface quality. Eventually severe grain refinement and work hardening boosted material hardness to ∼ 250 Kgf/mm². Advanced material characterization via electron backscatter diffraction (EBSD), transmission electron microscopy (TEM), and 3D optical profilometry highlighted distinct differences between the processing methods. While FM specimens exhibited unstable plastic flow, crack initiation, and severe pile-ups, the LSEM samples displayed uniform strain distribution and minimal surface damage. Friction tracking revealed a friction coefficient between 0.2 and 0.4, peaking at a 16 N force under maximum load. Detailed orientation image microscopy (OIM) based EBSD-kernal average misorientation (KAM) and grain orientation spread (GOS) analysis supported that this enhanced durability stems from increased dislocation activity and microstructural uniformity. Ultimately, this study establishes a clear relationship between the processing route, microstructural evolution, and scratch-wear response, demonstrating the potential of LSEM as an effective alternative processing strategy.

https://eprints.bournemouth.ac.uk/42474/

Source: Scopus

Mitigating the adverse effects of Free Machining on the wear behaviour of Large Strain Extrusion Machined brass260 alloy

Authors: Dhiman, M., Mittal, A., Huang, Y., Yadav, P.C.

Journal: Tribology International

Publication Date: 15/03/2027

Volume: 227

Pages: 112854

Publisher: Elsevier

eISSN: 1879-2464

ISSN: 0301-679X

DOI: 10.1016/j.triboint.2026.112854

https://eprints.bournemouth.ac.uk/42474/

Source: Manual

Preferred by: Yi Huang