Analyzing and modelling the corrosion behavior of Ni/Al<inf>2</inf>O<inf>3</inf>, Ni/SiC, Ni/ZrO<inf>2</inf> and Ni/graphene nanocomposite coatings

Authors: Nazir, M.H., Khan, Z.A., Saeed, A., Bakolas, V., Braun, W., Bajwa, R. and Rafique, S.

Journal: Materials

Volume: 10

Issue: 11

eISSN: 1996-1944

DOI: 10.3390/ma10111225

Abstract:

A study has been presented on the effects of intrinsic mechanical parameters, such as surface stress, surface elastic modulus, surface porosity, permeability and grain size on the corrosion failure of nanocomposite coatings. A set of mechano-electrochemical equations was developed by combining the popular Butler-Volmer and Duhem expressions to analyze the direct influence of mechanical parameters on the electrochemical reactions in nanocomposite coatings. Nanocomposite coatings of Ni with Al2O3, SiC, ZrO2 and Graphene nanoparticles were studied as examples. The predictions showed that the corrosion rate of the nanocoatings increased with increasing grain size due to increase in surface stress, surface porosity and permeability of nanocoatings. A detailed experimental study was performed in which the nanocomposite coatings were subjected to an accelerated corrosion testing. The experimental results helped to develop and validate the equations by qualitative comparison between the experimental and predicted results showing good agreement between the two.

https://eprints.bournemouth.ac.uk/29916/

Source: Scopus

Analyzing and Modelling the Corrosion Behavior of Ni/Al2O3, Ni/SiC, Ni/ZrO2 and Ni/Graphene Nanocomposite Coatings.

Authors: Nazir, M.H., Khan, Z.A., Saeed, A., Bakolas, V., Braun, W., Bajwa, R. and Rafique, S.

Journal: Materials (Basel)

Volume: 10

Issue: 11

ISSN: 1996-1944

DOI: 10.3390/ma10111225

Abstract:

A study has been presented on the effects of intrinsic mechanical parameters, such as surface stress, surface elastic modulus, surface porosity, permeability and grain size on the corrosion failure of nanocomposite coatings. A set of mechano-electrochemical equations was developed by combining the popular Butler-Volmer and Duhem expressions to analyze the direct influence of mechanical parameters on the electrochemical reactions in nanocomposite coatings. Nanocomposite coatings of Ni with Al₂O₃, SiC, ZrO₂ and Graphene nanoparticles were studied as examples. The predictions showed that the corrosion rate of the nanocoatings increased with increasing grain size due to increase in surface stress, surface porosity and permeability of nanocoatings. A detailed experimental study was performed in which the nanocomposite coatings were subjected to an accelerated corrosion testing. The experimental results helped to develop and validate the equations by qualitative comparison between the experimental and predicted results showing good agreement between the two.

https://eprints.bournemouth.ac.uk/29916/

Source: PubMed

Analyzing and Modelling the Corrosion Behavior of Ni/Al<sub>2</sub>O<sub>3</sub>, Ni/SiC, Ni/ZrO<sub>2</sub> and Ni/Graphene Nanocomposite Coatings

Authors: Nazir, M.H., Khan, Z.A., Saeed, A., Bakolas, V., Braun, W., Bajwa, R. and Rafique, S.

Journal: MATERIALS

Volume: 10

Issue: 11

ISSN: 1996-1944

DOI: 10.3390/ma10111225

https://eprints.bournemouth.ac.uk/29916/

Source: Web of Science (Lite)

Analysing and Modelling the Corrosion Behavior of Ni/Al2O3, Ni/SiC, Ni/ZrO2 and Ni/Graphene Nanocomposite Coatings

Authors: Nazir, M.H., Khan, Z., Saeed, A., Bakolas, V., Braun, W., Bajwa, R.S. and Rafiq, S.

Journal: Materials

Volume: 10

Issue: 11

Publisher: http://www.mdpi.com/1996-1944/10/11/1225/html

ISSN: 1996-1944

DOI: 10.3390/ma10111225

Abstract:

A study has been presented on the effects of intrinsic mechanical parameters, such as the surface stress, surface elastic modulus, surface porosity, permeability and grain size on the corrosion failure of nanocomposite coatings. A set of mechano-electrochemical equations was developed by combining the popular Butler-Volmer and Duhem expressions to analyse the direct influence of mechanical parameters on the electrochemical reactions in nanocomposite coatings. Nanocomposite coatings of Ni with Al2O3, SiC, ZrO2 and Graphene nanoparticles were studied as examples. The predictions showed that the corrosion rate of the nanocoatings increased with increasing grain size due to increase in surface stress, surface porosity and permeability of nanocoatings. A detailed experimental study was performed in which the nanocomposite coatings were subjected to an accelerated corrosion testing. The experimental results helped to develop and validate the equations by qualitative comparison between the experimental and predicted results showing good agreement between the two.

https://eprints.bournemouth.ac.uk/29916/

http://www.mdpi.com/1996-1944/10/11/1225

Source: Manual

Analyzing and Modelling the Corrosion Behavior of Ni/Al2O3, Ni/SiC, Ni/ZrO2 and Ni/Graphene Nanocomposite Coatings.

Authors: Nazir, M.H., Khan, Z.A., Saeed, A., Bakolas, V., Braun, W., Bajwa, R. and Rafique, S.

Journal: Materials (Basel, Switzerland)

Volume: 10

Issue: 11

Pages: E1225

eISSN: 1996-1944

ISSN: 1996-1944

DOI: 10.3390/ma10111225

Abstract:

A study has been presented on the effects of intrinsic mechanical parameters, such as surface stress, surface elastic modulus, surface porosity, permeability and grain size on the corrosion failure of nanocomposite coatings. A set of mechano-electrochemical equations was developed by combining the popular Butler-Volmer and Duhem expressions to analyze the direct influence of mechanical parameters on the electrochemical reactions in nanocomposite coatings. Nanocomposite coatings of Ni with Al₂O₃, SiC, ZrO₂ and Graphene nanoparticles were studied as examples. The predictions showed that the corrosion rate of the nanocoatings increased with increasing grain size due to increase in surface stress, surface porosity and permeability of nanocoatings. A detailed experimental study was performed in which the nanocomposite coatings were subjected to an accelerated corrosion testing. The experimental results helped to develop and validate the equations by qualitative comparison between the experimental and predicted results showing good agreement between the two.

https://eprints.bournemouth.ac.uk/29916/

Source: Europe PubMed Central

Analysing and Modelling the Corrosion Behavior of Ni/Al2O3, Ni/SiC, Ni/ZrO2 and Ni/Graphene Nanocomposite Coatings

Authors: Nazir, M.H., Khan, Z.A., Saeed, A., Bakolas, V., Braun, W., Bajwa, R. and Rafiq, S.

Journal: Materials

Volume: 10

Issue: 11

ISSN: 1996-1944

Abstract:

A study has been presented on the effects of intrinsic mechanical parameters, such as the surface stress, surface elastic modulus, surface porosity, permeability and grain size on the corrosion failure of nanocomposite coatings. A set of mechano-electrochemical equations was developed by combining the popular Butler-Volmer and Duhem expressions to analyse the direct influence of mechanical parameters on the electrochemical reactions in nanocomposite coatings. Nanocomposite coatings of Ni with Al2O3, SiC, ZrO2 and Graphene nanoparticles were studied as examples. The predictions showed that the corrosion rate of the nanocoatings increased with increasing grain size due to increase in surface stress, surface porosity and permeability of nanocoatings. A detailed experimental study was performed in which the nanocomposite coatings were subjected to an accelerated corrosion testing. The experimental results helped to develop and validate the equations by qualitative comparison between the experimental and predicted results showing good agreement between the two.

https://eprints.bournemouth.ac.uk/29916/

http://www.mdpi.com/journal/materials/special_issues/wear_corrosion_synergy_nanocoating_materials

Source: BURO EPrints