Jose Viesca Rodriguez

Jose Viesca Rodriguez

  • viescajose at uniovi dot es
Back to top

Journal Articles

  • Ramajo, B., Blanco, D., Rivera, N., Viesca, J.L., González, R. and Battez, A.H., 2021. Long-term thermal stability of fatty acid anion-based ionic liquids. Journal of Molecular Liquids, 328.
  • Viesca, J.L., Faes, J., Rivera, N., Rodríguez, E., Cadenas, M. and González, R., 2021. Thermal stability, traction and tribofilm formation of three fatty acid-derived ionic liquids. Tribology International, 154.
  • Viesca, J.L., Oulego, P., González, R., Guo, H., Battez, A.H. and Iglesias, P., 2021. Miscibility, corrosion and environmental properties of six hexanoate- and sulfonate-based protic ionic liquids. Journal of Molecular Liquids, 322.
  • Faes, J., González, R., Battez, A.H., Blanco, D., Fernández-González, A. and Viesca, J.L., 2021. Friction, wear and corrosion behavior of environmentally-friendly fatty acid ionic liquids. Coatings, 11 (1), 1-16.
  • Bartolomé Sáez, M., Hernández Battez, A.E., Espina Casado, J., Viesca Rodríguez, J.L., Fernández-González, A. and González Rodriguez, R., 2020. Tribological behavior of oils additised with a phosphonium-derived ionic liquid compared to a commercial oil. Industrial Lubrication and Tribology, 73 (1), 137-144.
  • Sernaglia, M., Blanco, D., Battez, A.H., Viesca, J.L., González, R. and Bartolomé, M., 2020. Two fatty acid anion-based ionic liquids - part I: Physicochemical properties and tribological behavior as neat lubricants. Journal of Molecular Liquids, 305.
  • Viesca, J.L., González-Cachón, S., García, A., González, R., Bernardo-Sánchez, A. and Hernández Battez, A., 2020. Influence of environmental conditions and oxidation on the coefficient of friction using microalloyed rail steels. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.
  • Rivera, N., Blanco, D., Viesca, J.L., Fernández-González, A., González, R. and Battez, A.H., 2019. Tribological performance of three fatty acid anion-based ionic liquids (FAILs) used as lubricant additive. Journal of Molecular Liquids, 296.
  • González, R., Viesca, J.L., Battez, A.H., Hadfield, M., Fernández-González, A. and Bartolomé, M., 2019. Two phosphonium cation-based ionic liquids as lubricant additive to a polyalphaolefin base oil. Journal of Molecular Liquids, 293.
  • Oulego, P., Faes, J., González, R., Viesca, J.L., Blanco, D. and Battez, A.H., 2019. Relationships between the physical properties and biodegradability and bacteria toxicity of fatty acid-based ionic liquids. Journal of Molecular Liquids, 292.
  • Battez, A.H., Rivera, N., Blanco, D., Oulego, P., Viesca, J.L. and González, R., 2019. Physicochemical, traction and tribofilm formation properties of three octanoate-, laurate- and palmitate-anion based ionic liquids. Journal of Molecular Liquids, 284, 639-646.
  • González, R., Ramos, D., Blanco, D., Fernández-González, A., Viesca, J.L., Hadfield, M. and Hernández Battez, A., 2019. Tribological performance of tributylmethylammonium bis(trifluoromethylsulfonyl)amide as neat lubricant and as an additive in a polar oil. Friction, 7 (3), 282-288.
  • Oulego, P., Blanco, D., Ramos, D., Viesca, J.L., Díaz, M. and Hernández Battez, A., 2018. Environmental properties of phosphonium, imidazolium and ammonium cation-based ionic liquids as potential lubricant additives. Journal of Molecular Liquids, 272, 937-947.
  • Viesca, J.L., González-Cachón, S., García, A., González, R. and Hernández Battez, A., 2018. Tribological behaviour of microalloyed and conventional C–Mn rail steels in a pure sliding condition. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 232 (9), 2201-2214.
  • Battez, A.H., Ramos, D., Blanco, D., González, R., Fernández-González, A. and Viesca, J.L., 2018. Lubrication Properties of the Ionic Liquid Dodecyl-3 Methylimidazolium bis(trifluoromethylsulfonyl)imide. Tribology Letters, 66 (1).
  • Fernández-González, A., Mallada, M.T., Viesca, J.L., González, R., Badía, R. and Hernández-Battez, A., 2017. Corrosion activity and solubility in polar oils of three bis(trifluoromethylsulfonyl) imide/bis(trifluoromethylsulfonyl) amide ([NTF2]) anion-based ionic liquids. Journal of Industrial and Engineering Chemistry, 56, 292-298.
  • Blanco, D., González, R., Viesca, J.L., Fernández-González, A., Bartolomé, M. and Hernández Battez, A., 2017. Antifriction and Antiwear Properties of an Ionic Liquid with Fluorine-Containing Anion Used as Lubricant Additive. Tribology Letters, 65 (2).
  • Blanco, D., Bartolomé, M., Ramajo, B., Viesca, J.L., González, R. and Hernández Battez, A., 2017. Isoconversional kinetic analysis applied to five phosphonium cation-based ionic liquids. Thermochimica Acta, 648, 62-74.
  • Viesca, J.L., Mallada, M.T., Blanco, D., Fernández-González, A., Espina-Casado, J., González, R. and Hernández Battez, A., 2017. Lubrication performance of an ammonium cation-based ionic liquid used as an additive in a polar oil. Tribology International, 116, 422-430.
  • Hernández Battez, A., Blanco, D., Fernández-González, A., Mallada, M.T., González, R. and Viesca, J.L., 2016. Friction, wear and tribofilm formation with a [NTf2] anion-based ionic liquid as neat lubricant. Tribology International, 103, 73-86.
  • Blanco, D., Viesca, J.L., Mallada, M.T., Ramajo, B., González, R. and Battez, A.H., 2016. Wettability and corrosion of [NTf2] anion-based ionic liquids on steel and PVD (TiN, CrN, ZrN) coatings. Surface and Coatings Technology, 302, 13-21.
  • Blanco, D., Bartolomé, M., Ramajo, B., Viesca, J.L., González, R. and Hernández Battez, A., 2016. Wetting Properties of Seven Phosphonium Cation-Based Ionic Liquids. Industrial and Engineering Chemistry Research, 55 (36), 9594-9602.
  • Anand, M., Hadfield, M., Viesca, J.L., Thomas, B., González, R., Cantrill, R. and Battez, A.H., 2016. Assessing boundary film forming behavior of phosphonium ionic liquids as engine lubricant additives. Lubricants, 4 (2).
  • González, R., Bartolomé, M., Blanco, D., Viesca, J.L., Fernández-González, A. and Battez, A.H., 2016. Effectiveness of phosphonium cation-based ionic liquids as lubricant additive. Tribology International, 98, 82-93.
  • Viesca, J.L., Anand, M., Blanco, D., Fernández-González, A., García, A. and Hadfield, M., 2016. Tribological behaviour of PVD coatings lubricated with a FAP- anion-based ionic liquid used as an additive. Lubricants, 4 (1).
  • Hernández Battez, A., Bartolomé, M., Blanco, D., Viesca, J.L., Fernández-González, A. and González, R., 2016. Phosphonium cation-based ionic liquids as neat lubricants: Physicochemical and tribological performance. Tribology International, 95, 118-131.
  • Anand, M., Hadfield, M., Viesca, J.L., Thomas, B., Hernández Battez, A. and Austen, S., 2015. Ionic liquids as tribological performance improving additive for in-service and used fully-formulated diesel engine lubricants. Wear, 334-335, 67-74.
  • Fernandes, C.M.C.G., Battez, A.H., González, R., Monge, R., Viesca, J.L., García, A., Martins, R.C. and Seabra, J.H.O., 2015. Torque loss and wear of FZG gears lubricated with wind turbine gear oils using an ionic liquid as additive. Tribology International, 90, 306-314.
  • Monge, R., González, R., Hernández Battez, A., Fernández-González, A., Viesca, J.L., García, A. and Hadfield, M., 2015. Ionic liquids as an additive in fully formulated wind turbine gearbox oils. Wear, 328-329, 50-63.
  • García, A., González, R., Hernández Battez, A., Viesca, J.L., Monge, R., Fernández-González, A. and Hadfield, M., 2014. Ionic liquids as a neat lubricant applied to steel-steel contacts. Tribology International, 72, 42-50.
  • Correia, B., Rodriguez, J.L., Valledor, L., Almeida, T., Santos, C., Cañal, M.J. and Pinto, G., 2014. Analysis of the expression of putative heat-stress related genes in relation to thermotolerance of cork oak. J Plant Physiol, 171 (6), 399-406.
  • Hernández Battez, A., Viesca, J.L., González, R., García, A., Reddyhoff, T. and Higuera-Garrido, A., 2014. Effect of Shear Rate, Temperature, and Particle Concentration on the Rheological Properties of ZnO and ZrO2 Nanofluids. Tribology Transactions, 57 (3), 489-495.
  • Viesca, J.L., Garcia, A., Hernandez Battez, A., Gonzalez, R., Monge, R., Fernandez-Gonzalez, A. and Hadfield, M., 2013. FAP(-) Anion Ionic Liquids Used in the Lubrication of a Steel-Steel Contact. TRIBOLOGY LETTERS, 52 (3), 431-437.
  • González, R., Battez, A.H., Viesca, J.L., Higuera-Garrido, A. and Fernández-González, A., 2013. Lubrication of DLC Coatings with Two Tris(pentafluoroethyl)trifluorophosphate Anion-Based Ionic Liquids. Tribology Transactions, 56 (5), 887-895.
  • Hernández Battez, A., González, R., Viesca, J.L., Fernández-González, A. and Hadfield, M., 2013. Lubrication of PVD coatings with ethyl-dimethyl-2-methoxyethylammonium tris(pentafluoroethyl)trifluorophosphate. Tribology International, 58, 71-78.
  • Higuera-Garrido, A., González, R., Cadenas, M., Viesca, J.L. and Hernández-Battez, A., 2011. Microstructure of NiCrBSi laser cladding coatings textured by ND-YAG laser. American Society of Mechanical Engineers, Tribology Division, TRIB, 55-57.
  • Battez, A.H., Alonso, D.B., Rodriguez, R.G., Rodriguez, J.L.V., Fernandez-Gonzalez, A. and Garrido, A.H., 2011. Lubrication of DLC and TiN coatings with two ionic liquids used as neat lubricant and oil additive. American Society of Mechanical Engineers, Tribology Division, TRIB, 95-97.
  • Rodriguez, R.G., Rodriguez, J.L.V., Battez, A.H., Asedegbega, E., Garrido, A.H. and Perez, A.T., 2011. 1-hexyl-3-methylimidazolium hexafluorophosphate as oil additive for the lubrication of steel-steel contacts and its influence on the running-in and wear-in periods. American Society of Mechanical Engineers, Tribology Division, TRIB, 87-89.
  • Pérez, A.T., Battez, A.H., García-Atance, G., Viesca, J.L., González, R. and Hadfield, M., 2011. Use of optical profilometry in the ASTM D4172 standard. Wear, 271 (11-12), 2963-2967.
  • Viesca, J.L., Hernández Battez, A., González, R., Chou, R. and Cabello, J.J., 2011. Antiwear properties of carbon-coated copper nanoparticles used as an additive to a polyalphaolefin. Tribology International, 44 (7-8), 829-833.
  • Blanco, D., González, R., Hernández Battez, A., Viesca, J.L. and Fernández-Gonzlez, A., 2011. Use of ethyl-dimethyl-2-methoxyethylammonium tris(pentafluoroethyl) trifluorophosphate as base oil additive in the lubrication of TiN PVD coating. Tribology International, 44 (5), 645-650.
  • Garrido, A.H., González, R., Cadenas, M. and Viesca, J.L., 2011. NiCrBSi coatings textured by Nd-YAG laser. International Journal of Surface Science and Engineering, 5 (2-3), 75-97.
  • Blanco, D., Battez, A.H., Viesca, J.L., González, R. and Fernández-González, A., 2011. Lubrication of CrN coating with ethyl-dimethyl-2-methoxyethylammonium tris(pentafluoroethyl)trifluorophosphate ionic liquid as additive to PAO 6. Tribology Letters, 41 (1), 295-302.
  • Chou, R., Battez, A.H., Cabello, J.J., Viesca, J.L., Osorio, A. and Sagastume, A., 2010. Tribological behavior of polyalphaolefin with the addition of nickel nanoparticles. Tribology International, 43 (12), 2327-2332.
  • González, R., Viesca, J.L., Hernández Battez, A., Torres Pérez, A. and García-Atanje, G., 2010. Tribological improvement of using ionic liquids and nanoparticles as oil additives. Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2010, 663-665.
  • Hernández Battez, A., Torres Pérez, A., García-Atanje, G., Viesca, J.L., González, R. and Hadfield, M., 2010. Advantages of using optical profilometry in the ASTM D4172 standard. Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2010, 644-646.
  • González, R., Hernández Battez, A., Blanco, D., Viesca, J.L. and Fernández-González, A., 2010. Lubrication of TiN, CrN and DLC PVD coatings with 1-butyl-1- methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate. Tribology Letters, 40 (2), 269-277.
  • Viesca, J.L., Hernandez Battez, A., Gonzalez, R., Reddyhoff, T., Perez, A.T. and Spikes, H.A., 2010. Assessing boundary film formation of lubricant additivised with 1-hexyl-3-methylimidazolium tetrafluoroborate using ECR as qualitative indicator. WEAR, 269 (1-2), 112-117.
  • Hernández Battez, A., Viesca, J.L., González, R., Blanco, D., Asedegbega, E. and Osorio, A., 2010. Friction reduction properties of a CuO nanolubricant used as lubricant for a NiCrBSi coating. Wear, 268 (1), 325-328.
  • Battez, A.H., González, R., Viesca, J.L., Blanco, D., Asedegbega, E. and Osorio, A., 2009. Tribological behaviour of two imidazolium ionic liquids as lubricant additives for steel/steel contacts. Wear, 266 (11-12), 1224-1228.
  • Hernández Battez, A., González, R., Viesca, J.L., Fernández, J.E., Díaz Fernández, J.M., Machado, A., Chou, R. and Riba, J., 2008. CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricants. Wear, 265 (3-4), 422-428.
  • Hernandez Battez, A., Fernandez Rico, J.E., Navas Arias, A., Viesca Rodriguez, J.L., Chou Rodriguez, R. and Diaz Fernandez, J.M., 2006. The tribological behaviour of ZnO nanoparticles as an additive to PAO6. Wear, 261 (3-4), 256-263.

Conferences

  • Blanco, D., González, R., Viesca, J.L., Fernández-González, A., Oulego, P. and Hernández Battez, A., 2018. Ammonium vs. phosphonium cation-based ionic liquids as neat lubricants: Physicochemical, environmental and tribological behavior. 302-304.
  • Anand, M., Hadfield, M., Thomas, B., Cantrill, R., Austen, S., Viesca, J.L. and Garland, N., 2014. Experimental analysis of anti-wear performance of marine engine lubricants. In: 5th World Tribology Congress 8-13 September 2013 Torino, Italy.
  • Battez, A.H., Rodriguez, R.G., Rodriguez, J.L.V. and Rico, J.E.F., 2009. Viscosity and tribology of copper oxide nanofluids. 205-207.
The data on this page was last updated at 04:08 on February 23, 2021.