Biography

Research

Favourites

• Okhotnikov, I., Abuowda, K., Noroozi, S. and Godfrey, P., 2020. Numerical and experimental investigation of the metering characteristic and pressure losses of the rotary tubular spool valve. Flow Measurement and Instrumentation, 71.
  • more information
  • view in BU repository
• Khoo, S.Y., Lian, Y.C., Ong, Z.C., Ismail, Z. and Noroozi, S., 2020. Feasibility study of performing experimental modal analysis with oblique impact testing using various oblique impact directions. Alexandria Engineering Journal, 59 (1), 457-473.
  • more information
• Noroozi, S., Rahman, A.G.A., Eng, H.C., Dupac, M., Ong, Z.C., Khoo, S.Y. and Kong, K.K., 2019. A novel investigation into the application of non-destructive evaluation for vibration assessment and analysis of in-service pipes. Nondestructive Testing and Evaluation, 34 (4), 413-428.
  • more information
  • view in BU repository
• Abuowda, K., Noroozi, S., Dupac, M. and Godfry, P., 2019. A dynamic model and performance analysis of a stepped rotary flow control valve. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 233 (9), 1195-1208.
  • more information
  • view in BU repository
• Abuowda, K., Noroozi, S., Dupac, M. and Godfrey, P., 2019. Model based driving analysis for a novel stepped rotary flow control valve. IFAC-PapersOnLine, 52 (12), 549-554.
  • more information
  • view in BU repository
• Noroozi, S., Ong, Z.C., Khoo, S.Y., Aslani, N. and Sewell, P., 2019. Dynamic characterisation of Össur Flex-Run prosthetic feet for a more informed prescription. Prosthetics and Orthotics International, 43 (1), 62-70.
  • more information
  • view in BU repository
• Craig, E., Noroozi, S., Sewell, P. and Harvey, A., 2018. Unilateral Vs Bilateral Total Knee Arthroplasty With A Kinematic-Retaining Prosthesis: Does Unilateral Or Bilateral Lead To Improved Outcomes In The Kinematics Of Walking Gait? In: 19th European Federation of National Associations of Orthopaedics and Traumatology (EFORT) Conference 30 May-1 June 2018 Barcelona.
  • more information
  • view in BU repository
• Ong, Z.C., Seet, Y.C., Khoo, S.Y. and Noroozi, S., 2018. Development of an economic wireless human motion analysis device for quantitative assessment of human body joint. Measurement: Journal of the International Measurement Confederation, 115, 306-315.
  • more information
• Craig, E., Noroozi, S., Harvey, A. and Sewell, P., 2017. Gait symmetry in walking and running after unilateral total knee replacement: Is there a relationship between walking and running symmetry? In: 26th Annual Meeting of the European Society for Movement Analysis in Adults and Children (ESMAC) 6-9 September 2017 Trondheim, Norway.
  • more information
  • view in BU repository
• Noroozi, S., Rahman, A.G.A., Ismail, Z. and Ong, Z.C., 2014. Enhancement of Impact-Synchronous Modal analysis (ISMA) with number of averages. Journal of Vibration and Control.
  • more information
  • view in BU repository
• Noroozi, S., Sewell, P. and Vinney, J.E., 2014. Investigation of bolt group configurations on load distribution and joint failure. Mechanics of Advanced Materials and Structures, 21 (5), 422-432.
  • more information
• Noroozi, S., Sewell, P., Vinney, J., Dyer, B.T.J., Rahman, A.G.A. and Zhi Chao, O., 2013. Modal analysis of composite prosthetic energy-storing-and-returning feet: an initial investigation. Proceedings of the Institution of Mechanical Engineers Part P: Journal of Sports Engineering and Technology, 227 (1), 39-48.
  • more information
• Rahman, A.G.A., Noroozi, S., Dupac, M., Al-Attas, S.M.S.M. and Vinney, J., 2013. A hybrid approach for non-destructive assessment and design optimisation and testing of in service machinery. Nondestructive Testing and Evaluation, 28 (1), 44-57.
  • more information
• Ong, Z.C., Rahman, A.G.A., Ismail, Z. and Noroozi, S., 2012. Study of open crack in rotor shaft using changes in Frequency Response Function Phase. International Journal of Damage Mechanics.
  • more information
• Noroozi, S., Sewell, P, Abdul Ghaffar Abdul Rahman, Vinney, J, Ong Zi Chao and Dyer, B., 2012. Performance enhancement of bi-lateral lower-limb amputees in the latter phases of running events: an initial investigation. Proceedings of the Institution of Mechanical Engineers Part P: Journal of Sports Engineering and Technology.
  • more information
• Noroozi, S., Sewell, P., Vinney, J., Dyer, B.T.J., Rahman, A.G.A. and Zhi Chao, O., 2011. Modal analysis of composite prosthetic energy-storing-and-returning feet: an initial investigation. Proceedings of the Institution of Mechanical Engineers Part P: Journal of Sports Engineering and Technology.
  • more information

Journal Articles

• Al-Nasser, S., Noroozi, S. and Harvey, A., 2024. Cadaveric Testing of a Novel Intraoperative Load Sensor for Soft-tissue balancing during Total Knee Replacements. Journal of Orthopaedic Reports.
  • more information
• Al-Nasser, S., Noroozi, S. and Harvey, A., 2024. Design of a Novel Intraoperative Sensor for Load Balancing and Tracking during Total Knee Replacements. -.
  • more information
• Harvey, A., Kohli, S., Al-Nasser, S. and Noroozi, S., 2024. Gait analysis of a kinematic retaining implant for Total knee replacements during walking and running. Journal of Orthopaedics, 56, 1-5.
  • more information
  • view in BU repository
• Al-Nasser, S., Noroozi, S., Harvey, A., Aslani, N. and Haratian, R., 2024. Exploring the Performance of an Artificial Intelligence-Based Load Sensor for Total Knee Replacements. Sensors, 24 (2).
  • more information
  • view in BU repository
• Long, S.X., Khoo, S.Y., Ong, Z.C., Soong, M.F., Huang, Y.H., Prasath, N. and Noroozi, S., 2023. A comprehensive review on mechanical amplifier structures in piezoelectric energy harvesters. Mechanics of Advanced Materials and Structures.
  • more information
  • view in BU repository
• Khoo, S.Y., Lian, Y.C., Ong, Z.C., Ismail, Z. and Noroozi, S., 2021. Development and Validation of Experimental Modal Analysis with Fixture-Free Oblique Impact Testing based on Vector Projection Method. Measurement Science and Technology.
  • more information
  • view in BU repository
• Yee, K.S., Cheng, L.Y., Chao, O.Z., Ismail, Z. and Noroozi, S., 2021. Development and validation of experimental modal analysis with fixture-free oblique impact testing based on a vector projection method. Measurement Science and Technology, 32 (1).
  • more information
  • view in BU repository
• Okhotnikov, I., Abuowda, K., Noroozi, S. and Godfrey, P., 2020. Numerical and experimental investigation of the metering characteristic and pressure losses of the rotary tubular spool valve. Flow Measurement and Instrumentation, 71.
  • more information
  • view in BU repository
• Abuowda, K., Okhotnikov, I., Noroozi, S., Godfrey, P. and Dupac, M., 2020. A review of electrohydraulic independent metering technology. ISA Transactions, 98, 364-381.
  • more information
  • view in BU repository
• Khoo, S.Y., Lian, Y.C., Ong, Z.C., Ismail, Z. and Noroozi, S., 2020. Feasibility study of performing experimental modal analysis with oblique impact testing using various oblique impact directions. Alexandria Engineering Journal, 59 (1), 457-473.
  • more information
• Noroozi, S., Rahman, A.G.A., Eng, H.C., Dupac, M., Ong, Z.C., Khoo, S.Y. and Kong, K.K., 2019. A novel investigation into the application of non-destructive evaluation for vibration assessment and analysis of in-service pipes. Nondestructive Testing and Evaluation, 34 (4), 413-428.
  • more information
  • view in BU repository
• Abuowda, K., Noroozi, S., Dupac, M. and Godfry, P., 2019. A dynamic model and performance analysis of a stepped rotary flow control valve. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 233 (9), 1195-1208.
  • more information
  • view in BU repository
• Abuowda, K., Noroozi, S., Dupac, M. and Godfrey, P., 2019. Model based driving analysis for a novel stepped rotary flow control valve. IFAC-PapersOnLine, 52 (12), 549-554.
  • more information
  • view in BU repository
• Noroozi, S., Ong, Z.C., Khoo, S.Y., Aslani, N. and Sewell, P., 2019. Dynamic characterisation of Össur Flex-Run prosthetic feet for a more informed prescription. Prosthetics and Orthotics International, 43 (1), 62-70.
  • more information
  • view in BU repository
• Aslani, N., Noroozi, S., Davenport, P., Hartley, R., Dupac, M. and Sewell, P., 2018. Development of a 3D workspace shoulder assessment tool incorporating electromyography and an inertial measurement unit—a preliminary study. Medical and Biological Engineering and Computing, 56 (6), 1003-1011.
  • more information
  • view in BU repository
• Ong, Z.C., Seet, Y.C., Khoo, S.Y. and Noroozi, S., 2018. Development of an economic wireless human motion analysis device for quantitative assessment of human body joint. Measurement: Journal of the International Measurement Confederation, 115, 306-315.
  • more information
• Ong, Z.C., Eng, H.C. and Noroozi, S., 2017. Non-destructive testing and assessment of a piping system with excessive vibration and recurrence crack issue: An industrial case study. Engineering Failure Analysis, 82, 280-297.
  • more information
  • view in BU repository
• Chinnery, H., Thompson, S.B.N., Noroozi, S., Dyer, B. and Rees, K., 2017. Questionnaire study to gain an insight into the manufacturing and fitting process of artificial eyes in children: an ocularist perspective. International Ophthalmology, 37 (5), 1175-1183.
  • more information
  • view in BU repository
• Okhotnikov, I., Noroozi, S., Sewell, P. and Godfrey, P., 2017. Evaluation of steady flow torques and pressure losses in a rotary flow control valve by means of computational fluid dynamics. International Journal of Heat and Fluid Flow, 64, 89-102.
  • more information
  • view in BU repository
• Hossain, M.S., Ong, Z.C., Ismail, Z., Noroozi, S. and Khoo, S.Y., 2017. Artificial neural networks for vibration based inverse parametric identifications: A review. Applied Soft Computing Journal, 52, 203-219.
  • more information
  • view in BU repository
• Davenport, P., Noroozi, S., Sewell, P. and Zahedi, S., 2017. Systematic Review of Studies Examining Transtibial Prosthetic Socket Pressures with Changes in Device Alignment. Journal of Medical and Biological Engineering, 37 (1).
  • more information
  • view in BU repository
• Chinnery, Thompson, S.B.N., Noroozi, S., Dyer, B. and Rees, K., 2017. The importance of incorporating technological advancements into the prosthetic eye development: a perspective commentary. Insights in Ophthalmology, 1 (1(2)), 1-4.
  • more information
• Chinnery, H., Thompson, S.B.N., Noroozi, S. and Dyer, B., 2017. Scoping review of the development of artificial eyes throughout the years. Edorium Journal of Disability and Rehabilitation, 3, 1-10.
  • more information
  • view in BU repository
• Sazzad Hossain, M., Ong Zhi Chao, Zubaidah Ismail, Siamak Noroozi and Khoo Shin Yee, 2017. Artificial neural networks for vibration based inverse parametric identifications: A review. Applied Soft Computing.
  • more information
• Noroozi, S., Khoo Shin Yee1,3,*, M., Ismail, Z., Ong Zhi Chao, A. and Hossain, M.S., 2017. Artificial Neural Networks for Vibration Based Inverse Parametric Identifications: A Review. Applied Soft Computing.
  • more information
• Chinnery, H., Thompson, S., Noroozi, S. and Dyer, B., 2016. Systematic Review of the development of artificial eyes throughout the years with a focus on the child wearer. Edorium Journal of Disability and Rehabilitation.
  • more information
• Aslani, N., Noroozi, S., Yee, K.S., Chao, A.O.Z. and Maggs, C., 2016. Simulation of gait asymmetry and energy transfer efficiency between unilateral and bilateral amputees. Sports Engineering, 19 (3), 163-170.
  • more information
  • view in BU repository
• Aslani, N., Noroozi, S., Hartley, R., Dupac, M. and Sewell, P., 2016. Assesment of key parameters on the performance of the deltoid muscle in reverse shoulder arthroplasty-A modeling and simulation-based study. Journal of Mechanics in Medicine and Biology, 16 (5).
  • more information
  • view in BU repository
• Hawkins, J., Noroozi, S., Dupac, M. and Sewell, P., 2016. Development of a Wearable Sensor System for Dynamically Mapping the Behavior of an Energy Storing and Returning Prosthetic Foot. Measurement Science Review, 16 (3), 174-182.
  • more information
  • view in BU repository
• Noroozi, S., Rahman, A.G.A., Dupac, M., Ong, Z.C., Mohd Al-Attas, M.B.S. and Davenport, P., 2016. Condition monitoring and diagnostics of an extruder motor and its gearbox vibration problem. Insight: Non-Destructive Testing and Condition Monitoring, 58 (2), 101-107.
  • more information
  • view in BU repository
• Dyer, B., 2016. An insight into the use and assessment of lower limb running prostheses in sport with a disability: A mixed method approach. Cogent Engineering, 3 (1).
  • more information
  • view in BU repository
• Hassani, H., Ghodsi, M., Shadi, M., Noroozi, S. and Dyer, B., 2015. An overview of the running performance of athletes with lower-limb amputation at the paralympic games 2004–2012. Sports, 3 (2), 103-115.
  • more information
  • view in BU repository
• Thompson, S.B.N., Chinnery, H., Noroozi, S., Dyer, B. and Barratt, K., 2015. Retinoblastoma: identifying the diagnostic signs for early treatment. International Journal of Neurorehabilitation, 2 (2), 1-11.
  • more information
  • view in BU repository
• Dyer, B.T.J. and Noroozi, S., 2015. A proposed field test method and an assessment of the rotational drag of contemporary front bicycle wheels. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 229 (1), 67-75.
  • more information
• Dyer, B., Noroozi, S. and Sewell, P., 2015. Sprinting with an amputation: Some race-based lower-limb step observations. Prosthetics and Orthotics International, 39 (4), 300-306.
  • more information
  • view in BU repository
• Davenport, P., Noroozi, S. and Sewell, P., 2015. Measurement of transtibial socket pressure distribution in gait with changes in prosthesis alignment - a systematic review. Clinical Biomechanics.
  • more information
• Kong, K.K., Khoo, S.Y., Ong, Z.C., Eng, H.C., Ismail, Z., Chong, W.T., Noroozi, S. and Rahman, A.G.A., 2014. Failure analysis of flow-induced vibration problem of in-serviced duplex stainless steel piping system in oil and gas industry. Materials Research Innovations, 18, S6-417-S6-422.
  • more information
• Kong, K.K., Ong, Z.C., Khoo, S.Y., Ismail, Z., Ang, B.C., Chong, W.T., Noroozi, S. and Rahman, A.G.A., 2014. Identification of material properties of orthotropic composite plate using hybrid non-destructive evaluation approach. Materials Research Innovations, 18, S6-423-S6-428.
  • more information
• Hassani, H., Ghodsi, M., Shadi, M., Noroozi, S. and Dyer, B., 2014. A statistical perspective on running with prosthetic lower-limbs: An advantage or disadvantage? Sports, 2 (4), 76-84.
  • more information
• Noroozi, S., Kong, K.K., Ong, Z.C., Khoo, S.Y., Ismail, Z., Ang, B.C., Chong, W.T. and Rahman, A.G.A., 2014. Identification of Material Properties of Orthotropic Composite Plate using Hybrid Non-destructive Evaluation Approach. Materials Research Innovations, 20 (11), 1645-1655.
  • more information
• Rahman, A.G.A., Yee, K.S., Ismail, Z., Kuan, K.K., Chao, O.Z., Tong, C.W. and Noroozi, S., 2014. Impact force identification using the modal transformation method in collocated and non-collocated cases. Journal of Mechanical Engineering and Sciences, 6, 968-974.
  • more information
  • view in BU repository
• Kong, K.K., Noroozi, S., Rahman, A.G.A., Dupac, M., Eng, H.C., Ong, Z.C., Khoo, S.Y. and Vinney, J.E., 2014. Non-destructive testing and assessment of dynamic incompatibility between third-party piping and drain valve systems: An industrial case study. Nondestructive Testing and Evaluation, 29 (2), 154-163.
  • more information
  • view in BU repository
• Noroozi, S., Rahman, A.G.A., Khoo, S.Y., Zahedi, S., Sewell, P., Dyer, B. and Ong, Z.C., 2014. The dynamic elastic response to impulse synchronisation of composite prosthetic energy storing and returning feet. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 228 (1), 24-32.
  • more information
  • view in BU repository
• Dupac, M. and Noroozi, S., 2014. Dynamic Modeling and Simulation of a Rotating Single Link Flexible Robotic Manipulator Subject to Quick Stops. Strojniški vestnik - Journal of Mechanical Engineering, 60 (7-8), 475-482.
  • more information
• Dyer, B.T.J., Sewell, P. and Noroozi, S., 2014. An Investigation into the Measurement and Prediction of Mechanical Stiffness of Lower-limb Prostheses used for Running. Assistive Technology, 26 (3), 157-163.
  • more information
  • view in BU repository
• Noroozi, S., Sewell, P. and Vinney, J.E., 2014. Investigation of bolt group configurations on load distribution and joint failure. Mechanics of Advanced Materials and Structures, 21 (5), 422-432.
  • more information
• Noroozi, S., Rahman, A.G.A., Ismail, Z. and Ong, Z.C., 2014. Enhancement of Impact-Synchronous Modal analysis (ISMA) with number of averages. Journal of Vibration and Control.
  • more information
  • view in BU repository
• Khoo, S.Y., Ismail, Z., Kong, K.K., Ong, Z.C., Noroozi, S., Chong, W.T. and Rahman, A.G.A., 2014. Impact force identification with pseudo-inverse method on a lightweight structure for under-determined, even-determined and over-determined cases. International Journal of Impact Engineering, 63, 52-62.
  • more information
  • view in BU repository
• Dyer, B., Sewell, P. and Noroozi, S., 2014. An Investigation into the Measurement and Prediction of Mechanical Stiffness of Lower-limb Prostheses used for Running. Assistive Technology, 26, 157-163.
  • more information
• Amali, R., Cooper, S. and Noroozi, S., 2014. Application of artificial neural network to predict static loads on an aircraft rib. IFIP Advances in Information and Communication Technology, 436, 576-584.
  • more information
• Reza Ramazani, M., Sewell, P., Noroozi, S., Khanadan, R. and Cripps, B., 2013. Using artificial neural networks and strain gauges for the determination of static loads on a thin square fully constrained composite marine panel subjected to a large central displacement. Insight (Northampton): non-destructive testing and condition monitoring, 55 (8), 442-448.
  • more information
  • view in BU repository
• Ramazani, M., Noroozi, S., Koohgilani, M., Cripps, B. and Sewell, P., 2013. Determination of in-service load on a marine composite panel utilising Artificial Intelligence. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 227 (1), 12-21.
  • more information
• Khandan, R., Noroozi, S., Sewell, P., Vinney, J. and Koohgilani, M., 2013. A Semi-Analytical Model for Deflection Analysis of Laminated plates with the Newton-Kantorovich-Quadrature Method. Materials Research - Ibero-american Journal of Materials, 16 (1).
  • more information
• Dyer, B., Sewell, P. and Noroozi, S., 2013. How should we assess the mechanical properties of lower-limb prosthesis technology used in elite sport ?: An initial investigation. Journal of Biomedical Science and Engineering, 6 (2), 116-123.
  • more information
  • view in BU repository
• Dyer, B., Sewell, P. and Noroozi, S., 2013. How should we assess the mechanical properties of lower-limb prosthesis technology used in elite sport?—An initial investigation. Journal of Biomedical Science and Engineering, 6, 116-123.
  • more information
• Khandan, R., Sewell, P., Noroozi, S. and Ramazani, M.R., 2013. FE design tool for laminated composite plates. Applied Mechanics and Materials, 248, 379-383.
  • more information
• Ramazani, M.R., Sewell, P., Noroozi, S., Koohgilani, M. and Cripps, B., 2013. In-service transient load measurement on a large composite panel. Applied Mechanics and Materials, 248, 204-211.
  • more information
• Ramazani, M.R., Sewell, P., Noroozi, S., Koohgilani, M. and Cripps, B., 2013. Sensor optimisation for in-service load measurement of a large composite panel under small displacement. Applied Mechanics and Materials, 248, 153-161.
  • more information
• Noroozi, S., Sewell, P., Vinney, J., Dyer, B.T.J., Rahman, A.G.A. and Zhi Chao, O., 2013. Modal analysis of composite prosthetic energy-storing-and-returning feet: an initial investigation. Proceedings of the Institution of Mechanical Engineers Part P: Journal of Sports Engineering and Technology, 227 (1), 39-48.
  • more information
• Rahman, A.G.A., Noroozi, S., Dupac, M., Al-Attas, S.M.S.M. and Vinney, J., 2013. A hybrid approach for non-destructive assessment and design optimisation and testing of in service machinery. Nondestructive Testing and Evaluation, 28 (1), 44-57.
  • more information
• Cardew George, Noroozi, S., Vinney, J. and Dupac, M., 2013. Optimal Group Configurations of Fibre Materials Based on Inclusion Modelling. MATERIALS AND APPLICATIONS FOR SENSORS AND TRANSDUCERS II, Key Engineering Materials, 543, 414-418.
  • more information
• Aloumi, A., Noroozi, S., Eves, B. and Dupac, M., 2013. The impact of color contrast on the perception of complexity–simplicity of design product. International Journal of Design Creativity and Innovation, 1 (4), 233-254.
  • more information
• Aloumi, A., Noroozi, S., Dupac, M. and Eves, B., 2013. Impact of Colour Contrast on the Perception of Complexity-Simplicity of Design Product. International Journal of Design Creativity and Innovation, 1 (4), 233-254.
  • more information
• Noroozi, S., Rahman, A.G.A., Khoo, S.Y., Zahedi, S., Sewell, P., Dyer, B. and Ong, Z.C., 2013. The Dynamic elastic response to impulse synchronisation (DERTIS) of composite prosthetic energy storing and returning feet. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, n/a.
  • more information
• Ong, Z.C., Rahman, A.G.A., Ismail, Z. and Noroozi, S., 2012. Study of open crack in rotor shaft using changes in Frequency Response Function Phase. International Journal of Damage Mechanics.
  • more information
• Vinney, J., Noroozi, S., Rahman, A.G.A., Sewell, P., Zhi Chao, O., Kuan, K.K. and Dupac, M., 2012. Analysis of Composite Prosthetic Energy-Storing-and-Returning (ESR)feet: A comparison between FEA and the experimental analysis. International Journal of COMADEM, 15 (3), 19-28.
  • more information
• Romouzy-Ali, A., Noroozi, S., Sewell, P. and Humphries-Smith, T., 2012. Adopting rapid prototyping technology within Small and Medium-Sized Enterprises: The differences between reality and expectation. International Journal of Innovation, Management and Technology, 3 (4), 427-432.
  • more information
• Sahandi, R., Sewell, P., Noroozi, S. and Hewitt, M., 2012. Remote Monitoring of Lower-Limb Prosthetic Socket fit using Wireless Technologies. Journal of Medical Engineering & Technology, 36, 50-56.
  • more information
• Sewell, P., Noroozi, S., Vinney, J., Amali, R. and Andrews, S., 2012. Static and dynamic load prediction for prosthetic socket fitting assessment utilising an inverse problem approach. Artificial Intelligence in Medicine, 54 (1), 29-41.
  • more information
• Dyer, B.T.J., Sewell, P. and Noroozi, S., 2012. Performance improvement using lower-limb prosthesis in sprint running: a proposal. Sports Technology.
  • more information
• Dyer, B.T.J., Sewell, P., Noroozi, S., Broomfield, S. and Callaway, A., 2012. Sprint Prostheses used at the Paralympics: A proposal for an assessment method to maintain fairness. Prosthetics and Orthotics International, 36 (3), 306-311.
  • more information
• Dyer, B.T.J., Sewell, P. and Noroozi, S., 2012. The Performance Improvement of Paralympic Lower-limb Amputee Sprinting and the Potential Impact of Prosthesis Technology. Journal of Sports Sciences.
  • more information
• Dyer, B.T.J., Sewell, P. and Noroozi, S., 2012. The Value of technological progress in Paralympic Games sprinting with a lower-limb amputation. European Journal of Sports Science.
  • more information
• Khandan, R., Sewell, P., Noroozi, S. and Koohgilani, M., 2012. Optimum Design of Fibre Orientation in Composite Laminate Plates for Out-plane Stresses. Advances in Materials Science and Engineering.
  • more information
• Khandan, R., Noroozi, S., Vinney, J., Sewell, P. and Koohgilani, M., 2012. A Semi-Analytical Model for Buckling of Laminated plates with the NKQ Method. Applied Mechanics and Materials, 232, 68-72.
  • more information
• Noroozi, S., Sewell, P., Khandan, R. and Vinney, J., 2012. An Empirical Model of Ribbed Cylindrical Glass Reinforced Plastic Tanks. Applied Mechanics and Materials, 232, 51-56.
  • more information
• Ramazani, M., Noroozi, S., Koohgilani, M., Cripps, B. and Sewell, P., 2012. Determination of static pressure loads on a marine composite panel from strain measurements utilising artificial neural networks. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment.
  • more information
• Rahman, A.G.A., Noroozi, S., Dupac, M. and Vinney, J., 2012. A hybrid approach for non-destructive assessment and design optimisation and testing of in service machinery. Nondestructive Testing and Evaluation.
  • more information
• Khandan, R., Noroozi, S., Sewell, P. and Vinney, J., 2012. The development of laminated composite plate theories – a review. Journal of Materials Science.
  • more information
• Noroozi, S., Sewell, P, Abdul Ghaffar Abdul Rahman, Vinney, J, Ong Zi Chao and Dyer, B., 2012. Performance enhancement of bi-lateral lower-limb amputees in the latter phases of running events: an initial investigation. Proceedings of the Institution of Mechanical Engineers Part P: Journal of Sports Engineering and Technology.
  • more information
• Dyer, B.T.J., Noroozi, S., Sewell, P. and Redwood, S., 2011. The fair use of lower-limb running prostheses: A Delphi study. Adapted Physical Activity Quarterly, 28, 16-26.
  • more information
• Noroozi, S., Sewell, P., Vinney, J., Dyer, B.T.J., Rahman, A.G.A. and Zhi Chao, O., 2011. Modal analysis of composite prosthetic energy-storing-and-returning feet: an initial investigation. Proceedings of the Institution of Mechanical Engineers Part P: Journal of Sports Engineering and Technology.
  • more information
• Dyer, B.T.J., Sewell, P. and Noroozi, S., 2011. An Investigation into the Measurement of Mechanical Stiffness of Lower-limb Prosthesis in 100m Sprinting with a Uni-lateral Amputation. Ergonomics.
  • more information
• Rahman, A.G.A., Noroozi, S. and Yee Khoo, S., 2011. Impact force identification from known acceleration responses using Gaussian Elimination with Partial Pivoting Inverse Technique. Mechanical Systems and Signal Processing.
  • more information
• Dyer, B.T.J., Noroozi, S., Sewell, P. and Redwood, S., 2011. The Fair use of lower-limb running prostheses: A Delphi study. Adapted Physical Activity Quarterly, 28, 16-26.
  • more information
• Sahandi, R., Noroozi, S., Roushan, G., Heaslip, V. and Liu, Y., 2010. Wireless technology in the evolution of patient monitoring on general hospital wards. Journal of Medical Engineering & Technology, 34, 51-63.
  • more information
• Sewell, P., Noroozi, S., Vinney, J., Amali, R. and Andrews, S., 2010. Improvements in the Accuracy of an Inverse Problem Engine's Output for the Prediction of Below-Knee Prosthetic Socket Interfacial Loads. Engineering Applications of Artificial Intelligence, 23 (6), 1000-1011.
  • more information
• Dyer, B.T.J., Noroozi, S., Sewell, P. and Redwood, S., 2010. The Design of lower-limb sports prostheses: fair inclusion in disability sport. Disability and Society, 25, 593-602.
  • more information
• Amali, R., Noroozi, S., Vinney, J., Sewell, P. and Andrews, P.S., 2008. An Artificial Intelligence Approach for Measurement and Monitoring of Pressure at the Residual Limb/Socket Interface – A Clinical Study. Insight - Non-Destructive Testing and Condition Monitoring, 50 (7), 374-383.
  • more information
• Maheri, A., Noroozi, S. and Vinney, J., 2007. Decoupled Aerodynamic and Structural Design of Wind Turbine Adaptive Blades. Renewable Energy, 32, 1753-1767.
  • more information
• Sewell, P., Vinney, J., Noroozi, S., Amali, R. and Andrews, S., 2007. Qualitative and Quantitative Monitoring of Amputee Gait Cycle to Aid in Prostheses Fit Assessment. International Journal of COMADEM, 10, 39-47.
  • more information
• Maheri, A., Noroozi, S. and Vinney, J., 2007. Combined Analytical/FEA-based Coupled Aero Structure Simulation of a Wind Turbine with Bend–Twist Adaptive Blades. Renewable Energy, 32, 916-930.
  • more information
• Maheri, A., Noroozi, S. and Vinney, J., 2007. Application of Combined Analytical/FEA Coupled Aero-Structure Simulation in Design of Wind Turbine Adaptive Blades. Renewable Energy, 32, 2011-2018.
  • more information
• Amali, R., Noroozi, S., Vinney, J., Sewell, P. and Andrews, S., 2006. Predicting interfacial loads between the prosthetic socket and the residual limb for below-knee amputees - a case study. Strain, 42, 3-10.
  • more information
• Noroozi, S., Sewell, P. and Vinney, J., 2006. The Application of a Hybrid Inverse Boundary Element Problem Engine for the Solution of Potential Problems. Computer Modelling in Engineering and Sciences, 14, 171-180.
  • more information
• Maheri, A., Noroozi, S., Toomer, C.A. and Vinney, J., 2005. Efficient meshing of a wind turbine blade using force adaptive mesh sizing functions. Renewable Energy, 32, 95-104.
  • more information
• Maheri, A., Noroozi, S., Toomer, C.A. and Vinney, J., 2005. WTAB, a computer program for predicting the performance of horizontal axis wind turbines with adaptive blades. Renewable Energy, 31, 1673-1685.
  • more information
• Sewell, P., Vinney, J., Noroozi, S., Amali, R. and Andrews, S., 2005. A photoelastic clinical study of the static load distribution at the stump/socket interface of PTB sockets. Prosthetics and Orthotics International, 29, 291-301.
  • more information
• Noroozi, S., Amali, R., Vinney, J. and Sewell, P., 2005. Use of Artificial Neural Networks for Real Time Determination of Loads on In-Service Components. International Journal of Engineering Simulation, 6, 3-8.
  • more information
• Noroozi, S., Amali, R. and Vinney, J., 2004. Inverse Problem Approach using Photoelastic Analysis and Artificial Neural Networks in Tandem. Strain, 40, 73-77.
  • more information
• Sewell, P., Noroozi, S. and Vinney, J., 2000. A Tool for Monitoring Real Time Interface Stress Distributions on A Trans-Tibial Socket: A Preliminary Study. International Journal of COMADEM, 3, 16-21.
  • more information
• Vinney, J., Noroozi, S., Sewell, P. and Blount, G., 2000. The Case for a Case-based Design Assistant. Acta Polytechnica; Journal of Advanced Engineering Design, 40, 3-8.
  • more information
• Vinney, J., Noroozi, S., Sewell, P. and Blount, G., 2000. Case-Based Prosthetic Socket Design. The Design Journal, 3, 36-45.
  • more information
• Sewell, P., Noroozi, S., Vinney, J. and Andrews, S., 2000. Developments in the Trans-Tibial Prosthetic Socket Fitting Process: A Review of Past and Present Research. Prosthetics and Orthotics International, 24, 97-107.
  • more information
• Rahman, A.G.A. and Noroozi, S., 1998. Investigation into vibration problems in 24 Class locomotives using COMO-R. Insight: Non-Destructive Testing and Condition Monitoring, 40 (8).
  • more information
• Rahman, A.G.A. and Noroozi, S., 1998. An investigation into vibration problems in 24 Class locomotives using COMO-R. INSIGHT, 40 (8), 564-+.
  • more information
• Noroozi, S. and Rahman, A.G.A., 1997. Condition monitoring of power plant for 24 Class locomotives using COMO-D/R. Insight: Non-Destructive Testing and Condition Monitoring, 39 (8), 558-561.
  • more information
• Shi, H., Tite, C., Hope, A.D., Noroozi, S., Poyntz-Wright, L. and Marshall, A., 1996. Using condition monitoring to predict furnace decay during the optical fibre drawing process. Insight: Non-Destructive Testing and Condition Monitoring, 38 (1), 57-59.
  • more information
• Shi, H., Tite, C., Hope, T., Noroozi, S., Poyntz-Wright, L. and Marshall, A., 1996. The application of neural networks to a condition monitoring system for the optical fibre drawing process. Intelligent Engineering Systems Through Artificial Neural Networks, 6, 915-920.
  • more information
• Baker, K., Rao, B.K.N., Hope, A.D. and Noroozi, S., 1996. Performance monitoring of a machining centre. Conference Record - IEEE Instrumentation and Measurement Technology Conference, 2, 853-858.
  • more information
• Marcham, L.J., Rao, B.K.N., Noroozi, S. and Penson, R.P., 1995. Real-time control of industrial manipulator vibration using artificial neural networks. IEEE International Conference on Neural Networks - Conference Proceedings, 5, 2550-2554.
  • more information
• Van Noort, R., Cardew, G.E., Howard, I.C. and Noroozi, S., 1991. The effect of local interfacial geometry on the measurement of the tensile bond strength to dentin. J Dent Res, 70 (5), 889-893.
  • more information
• Van Noort, R., Noroozi, S., Howard, I.C. and Cardew, G., 1989. A critique of bond strength measurements. J Dent, 17 (2), 61-67.
  • more information

Chapters

• Cardew, G., Noroozi, S., Vinney, J. and Dupac, M., 2013. Optimal group configurations of fibre materials based on inclusion modelling. Key Engineering Materials. Trans Tech Publications Ltd, Laubisrutistr. 24, CH-8712 Stafa-Zurich, Switzerland., 414-418.
  • more information
• Dupac, M. and Noroozi, S., 2013. Dynamic Analysis of a Constrained Rotating Flexible Extensible Link with Semi-Periodic Impact. In: Z. Dimitrovová, de Almeida, J.R. and Goncalves, R., eds. Proceedings of the 11th International Conference on Vibration Problems. Portugal: APMTAC, 1-9.
  • more information
• Noroozi, S., Dupac, M. and Rahman, A.G.A., 2012. Dynamic Design Verification (DDV) of vertical pump using, combined Modal Analysis (MA), Finite Element Analysis (FEA) & Operation Deflection Shape (ODS). Recent Researches in Applied Mechanics: Proceedings of the 3rd International Conference on Theoretical and Applied Mechanics. WSEAS, 18-23.
  • more information
• Noroozi, S., Rahman, A.G.A., Dupac, M. and Vinney, J., 2012. Dynamic characteristics of prosthetic feet: A comparison between modal parameters of walking, running and sprinting foot. In: Jaroslav Beran, Martin Bílek, Monika Hejnova and Petr Zabka, eds. Advances in Mechanisms Design. Springer Netherlands, 339-344.
  • more information
• Dupac, M. and Noroozi, S., 2012. Modeling and Simulation of a Slider Crank Mechanism with a Flexible Extensible Link. Advances in Mechanisms Design. Springer Netherlands, 175-180.
  • more information
• Dupac, M. and Noroozi, S., 2011. FEM modeling and dynamical behavior of a flexible cracked linkage mechanism with clearance. In: Naprstek, J., Horacek, J., Okrouhlík, M., Marvalova, B., Verhulst, F. and Sawicki, J., eds. Vibration Problems ICOVP 2011. Springer, 275-280.
  • more information
• Sewell, P., Noroozi, S., Vinney, J., Amali, R. and Andrews, S., 2008. An Artificial Intelligence Approach for Measurement and Monitoring of Pressure at the Residual Limb/Socket Interface- A Clinical Approach. Proceedings CM 2008 / MFPT 2008 - The Fifth International Conference on Condition Monitoring & Machinery Failure Prevention Technologies Edinburgh, Scotland, UK, 15-18 July 2008. CM and MFPT, 1294-1304.
  • more information
• Shrazi Kia, S., Noroozi, S., Carse, B., Vinney, J. and Rabbani, M., 2006. Prediction of Failure in Pin-Joints Using Hybrid Adaptive Neuro-Fuzzy Approach. IEEE 2006 International Conference on Fuzzy Systems, 16-21 July 2006. IEEE, 671-677.
  • more information
• Rabbani, M., Noroozi, S., Vinney, J. and Shrazi Kia, S., 2006. The Application of Artificial Intelligence in Health Monitoring of Aerospace Structures. In: Topping, B.H.V., Montero, G. and Montenegro, R., eds. Proceedings of the Fifth International Conference on Engineering Computational Technology, 2006, Las Palmas de Gran Canaria, Spain. Kippen: Civil-Comp Press.
  • more information
• Rabbani, M., Noroozi, S., Vinney, J. and Shrazi Kia, S., 2006. An Inverse Method of Load Determination Using Hybrid Genetic Algorithm, Artificial Neural Network and Finite Element Analysis. In: Topping, B.H.V., Montero, G. and Montenegro, R., eds. Proceedings of the Fifth International Conference on Engineering Computational Technology, 2006, Las Palmas de Gran Canaria, Spain. Kippen: Civil-Comp Press.
  • more information
• Shrazi Kia, S., Noroozi, S., Carse, B., Vinney, J. and Rabbani, M., 2006. Failure Modelling in Pin-Loaded Joints Using Adaptive Neuro-Fuzzy Approach. In: Topping, B.H.V., Montero, G. and Montenegro, R., eds. Proceedings of the Fifth International Conference on Engineering Computational Technology, 2006, Las Palmas de Gran Canaria, Spain. Kippen: Civil-Comp Press.
  • more information
• Shrazi Kia, S., Noroozi, S., Carse, B. and Vinney, J., 2005. Application of Data Mining Techniques in Predicting the Behaviour of Composite Joints. In: Topping, B.H.V., ed. Proceedings of the eighth international conference on the application of artificial intelligence to civil, structural and environmental engineering, 2005, Rome, Italy. Stirling: Civil-Comp Press, 47-48.
  • more information
• Rabbani, M., Noroozi, S., Vinney, J., Kia Shrazi, S. and Rao, B.K.N., 2005. Application of Hybrid Genetic Algorithm and Neural Network to Load Identification. In: Mba, D.U. and Rao, R.B.K.N., eds. Condition monitoring and diagnostic engineering management (COMADEM 2005) : proceedings of the 18th international congress, 31st August-2nd September 2005, Cranfield, UK. Cranfield: Cranfield University Press, 553-563.
  • more information
• Amali, R., Noroozi, S. and Vinney, J., 2004. A Hybrid Approach for Measurement of Normal Pressure Between Residual Limb and Prosthetic Socket. Proceedings of the 11th World Congress of the International Society for Prosthetics and Orthotics, Hong Kong, August 1-6, 2004. Hong Kong: International Society for Prosthetics and Orthotics, 149.
  • more information
• Rabbani, M., Noroozi, S., Vinney, J. and Rao, B.K.N., 2004. Application of Hybrid FEA and ANN for Health Monitoring of Aerospace Structures. In: Rao, R.B.K.N., Jones, B.E. and Grosvenor, R.I., eds. Condition monitoring and diagnostic engineering management : (COMADEM 2004) : proceedings of the 17th international congress Birmingham, England. Birmingham: COMADEM International, 2004., 222-231.
  • more information
• Noroozi, S., Amali, R. and Vinney, J., 2003. Real-Time Load Determination for In-Service Components Using Photostress Analysis and Artificial Neural Networks in Tandem. International Conference on Artificial Intelligence, June 2003, Las Vegas. Las Vegas: CSREA Press, 841-845.
  • more information
• Noroozi, S., Vinney, J. and Amali, R., 2003. Use of Artificial Neural Networks (ANN) for Real Time Determination of Loads on In-Service Components. International Conference on Artificial Intelligence, June 2003, Las Vegas. CSREA Press, 858-864.
  • more information
• Noroozi, S., Vinney, J. and Amali, R., 2003. Application of Combined BEA and ANN for the Real Time Solution of 3D Boundary Domain Problems. Proceedings of the 4th International Conference on Boundary Element Techniques, Granada, Spain, 15-17 July 2003. BeTeq2003 International Conference on Boundary Element Techniques, 379-383.
  • more information
• Noroozi, S., Vinney, J., Tucker, L. and Amali, R., 2003. Combined BEA and ANN for the Analysis of 3D Inverse Boundary Domain Problems. BeTeq2003 4th International Conference on Boundary Element Techniques Granada, Spain, 15-17 July 2003. BeTeq2003 International Conference on Boundary Element Techniques, 439-444.
  • more information
• Noroozi, S., Amali, R. and Vinney, J., 2002. Condition Monitoring of a Prosthetic Socket. Condition monitoring and diagnostic engineering management : COMADEM 2002 : proceedings of the 15th International congress. Birmingham, England: Comadem International, 568-677.
  • more information
• Noroozi, S., Amali, R. and Vinney, J., 2002. Development of a Generalized Inverse Problem Engine for Boundary Element Analysis of a Potential Problem. 3rd International Conference on Boundary Element Techniques, Beijing, China. Springer Verlag, 169-175.
  • more information
• Amali, R., Vinney, J., Noroozi, S. and Patel, V., 2002. The Use of Back Propagation Neural Network to Determine the Load Distribution on a Component. Second International Conference on Hybrid Intelligent Systems (HIS 2002), Santiago, Chile. Amsterdam; Washington DC: IOS Press, 15-20.
  • more information
• Noroozi, S., Vinney, J. and Amali, R., 2001. The Application of Combined Artificial Neural Network and Boundary Element for Potential Problems. International conference on boundary element techniques (Joint meeting) (2nd : 2001 Jul : New Brunswick, NJ). Hoggar, 47-56.
  • more information
• Vinney, J., Blount, G. and Noroozi, S., 1999. A Conceptual Design Assistant(CODAS) Integration of Process Knowledge into Design Support Systems. In: Kals, H. and van Nouten, F., eds. Integration of Process Knowledge into Design Support Systems: Proceedings of the 1999 CIRP International Design Seminar, University of Twente, Enschede, The Netherlands, 24-26 March 1999. Dordrecht: Klewer Academic Publishers, 91-100.
  • more information
• Vinney, J., Noroozi, S., Sewell, P. and Blount, G., 1999. The Case for a Case-Based Prosthetic Socket Design Assistant. In: Fiala, P. and Smrc ek, L., eds. Proceedings of the First International Conference on Advanced Engineering Design, Prague, May 31 - June 2, 1999. Prague, Czech Republic: CTU Publishing House, 45-46.
  • more information

Conferences

• Noroozi, S., Aslani, N., Al-Nasser, S. and Hartley, R., 2024. The Need for Monitoring Deltoid Tension and Shoulder Kinematics during a Total Reverse Shoulder Arthroplasty (RSA). 20th International Conference on Condition Monitoring and Asset Management, CM 2024.
  • more information
• Al-Nasser, S., Noroozi, S. and Harvey, A., 2024. Cadaveric Testing of a Novel Sensor for Non-Destructive Load Balancing in Total Knee Replacements (TKRs). 20th International Conference on Condition Monitoring and Asset Management, CM 2024.
  • more information
• Noroozi, S., Al-Nasser, S., Aslani, N. and Harvey, A., 2023. An intelligent knee joint force tracking and balancing system using ANN. 19th International Conference on Condition Monitoring and Asset Management, CM 2023.
  • more information
• Al-Nasser, S., Noroozi, S., Haratian, R., Aslani, N. and Harvey, A., 2023. Load Prediction using an Intraoperative Joint Sensor and Artificial Neural Network. 19th International Conference on Condition Monitoring and Asset Management, CM 2023.
  • more information
• Al-Nasser, S., Noroozi, S., Harvey, A. and Haratian, R., 2022. Review of Kinematics and Joint Load Forces in Total Knee Replacements Influencing Surgical Outcomes. In: 18th International Conference on Condition Monitoring and Asset Management 13-17 June 2022 Heathrow, London.
  • more information
• Haratian, R. and Samira, A.-N., 2022. A Review of Balancing Methods for Total Knee Replacements. In: The 18th International Conference on Condition Monitoring and Assessment Management 6-9 June 2022 London.
  • more information
• Abuowda, K., Dupac, M., Noroozi, S. and Godfrey, P., 2022. Mathematical-based control method and performance analysis of a novel hydromechatronics driving system micro-independent metering. Mathematical Methods in the Applied Sciences, 45 (4), 2443-2459.
  • more information
  • view in BU repository
• Noroozi, S., Searle, Z., Al-Nasser, S.K. and Harvey, A., 2022. Towards better understanding the need for better joint force monitoring when balancing knee joint force during Total Knee Replacements. 18th International Conference on Condition Monitoring and Asset Management, CM 2022, 222-234.
  • more information
  • view in BU repository
• Abuowda, K., Noroozi, S., Dupac, M. and Godfrey, P., 2019. Algorithm Design for the Novel Mechatronics Electro-Hydraulic Driving System: Micro-Independent Metering. Proceedings - 2019 IEEE International Conference on Mechatronics, ICM 2019, 7-12.
  • more information
  • view in BU repository
• Okhotnikova, I., Abuowda, K., Noroozi, S. and Godfrey, P., 2018. Experimental validation of simulated metering and power loss characteristics of the rotary tubular spool valve. In: 24th International Compressor Engineering Conference 9-12 July 2018 Purdue at West Lafayette, LA, USA.
  • more information
  • view in BU repository
• Abuowada, K., Dyke, D., Noroozi, S. and Okhotnikov, I., 2018. Dynamic Performance Analysis of PID and Fuzzy Logic Controllers Applicable in Electrohydraulic Servo Actuator. In: 3th APCA International Conference on Automatic Control and Soft Computing (CONTROLO 2018) 4-6 June 2018 Ponta Delgada, São Miguel Island, Azores, Portugal.
  • more information
  • view in BU repository
• Craig, E., Noroozi, S., Sewell, P. and Harvey, A., 2018. Unilateral Vs Bilateral Total Knee Arthroplasty With A Kinematic-Retaining Prosthesis: Does Unilateral Or Bilateral Lead To Improved Outcomes In The Kinematics Of Walking Gait? In: 19th European Federation of National Associations of Orthopaedics and Traumatology (EFORT) Conference 30 May-1 June 2018 Barcelona.
  • more information
  • view in BU repository
• Aslani, N., Noroozi, S., Davenport, P. and Abuowda, K., 2018. Real-time interfacial load monitoring and tracking between the composite prosthetic socket and residual limb for below-knee amputees. 15th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM 2018/MFPT 2018, 92-101.
  • more information
  • view in BU repository
• Abuowda, K., Noroozi, S., Dupac, M. and Godfrey, P., 2018. Sensor-less control of a novel stepped hydraulic flow control valve. 15th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM 2018/MFPT 2018, 83-91.
  • more information
  • view in BU repository
• Abuowda, K., Okhotnikov, I., Noroozi, S. and Godfrey, P., 2018. Friction analysis and modelling of a novel stepped rotary flow control valve. 15th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM 2018/MFPT 2018, 117-128.
  • more information
  • view in BU repository
• Aslani, N., Noroozi, S., Hartley, R., Harvey, A. and Sewell, P., 2018. Kinematics study of the deltoid in Reverse Shoulder Arthroplasty using Standard Pre and Post-Operative X-Rays. 15th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM 2018/MFPT 2018, 102-116.
  • more information
  • view in BU repository
• Craig, E., Noroozi, S., Harvey, A. and Sewell, P., 2017. Gait symmetry in walking and running after unilateral total knee replacement: Is there a relationship between walking and running symmetry? In: 26th Annual Meeting of the European Society for Movement Analysis in Adults and Children (ESMAC) 6-9 September 2017 Trondheim, Norway.
  • more information
  • view in BU repository
• Davenport, P., Sewell, P., Noroozi, S., Zahedi, S., McCarthy, J. and McGrath, M., 2017. Sensitivity of an inverse-problem socket pressure measurement system to changes in applied forces from standing. In: International Society for Prosthetics and Orthotics 16TH World Congress 8-11 May 2017 Cape Town, South Africa.
  • more information
  • view in BU repository
• Davenport, P., Noroozi, S., Sewell, P., Zahedi, S., McCarthy, J. and McGrath, M., 2017. An augmented reality method of visualising transtibial socket pressures and limb orientation. In: International Society for Prosthetics and Orthotics 16TH World Congress 8-11 May 2017 Cape Town, South Apfrica.
  • more information
  • view in BU repository
• Rahman, A.G.A., Al-Attas, S.M.S.M., Noroozi, S. and Dupac, M., 2017. Condition monitoring of a compressor motor unit: An investigation of abnormal high pitch noise. WCCM 2017 - 1st World Congress on Condition Monitoring 2017.
  • more information
• Hawkins, J., Noroozi, S., Dupac, M. and Sewell, P., 2017. An investigation of the effect of boundary conditions on the mechanical characteristics of an energy storing and returning prosthetic foot subject to non-destructive testing. WCCM 2017 - 1st World Congress on Condition Monitoring 2017.
  • more information
  • view in BU repository
• Davenport, P., Noroozi, S., Sewell, P. and Zahedi, S., 2017. Monitoring the suitability of the fit of a lower-limb prosthetic socket using an artificial neural network in commonly encountered walking conditions. WCCM 2017 - 1st World Congress on Condition Monitoring 2017.
  • more information
  • view in BU repository
• Noroozi, S., Aslani, N., Sewell, P., Ong, A. and Khoo, M., 2017. Visualising kinematic of elastic Ossur ESR Prosthetic foot using novel low cost optical tracking systems. WCCM 2017 - 1st World Congress on Condition Monitoring 2017.
  • more information
  • view in BU repository
• Sewell, P., Noroozi, S., Davenport, P., Bascou, J., Villa, C. and Zahedi, S., 2016. Technological Innovations in prosthetic socket fitting – an external method to assess the residual limb/socket interaction. In: 20th National Scientifc Congress - ISPO France 17-18 November 2016 Lille, France.
  • more information
• Hawkins, J., Sewell, P. and Dupac, M., 2016. Understanding the design variables that contribute to the response of a prosthetic foot: Part i - Rig design. 1st International Conference on Multidisciplinary Engineering Design Optimization, MEDO 2016.
  • more information
  • view in BU repository
• Hawkins, J., Sewell, P. and Dupac, M., 2016. Understanding the design variables that contribute to the response of a prosthetic foot: Part II - Rig validation. 1st International Conference on Multidisciplinary Engineering Design Optimization, MEDO 2016.
  • more information
  • view in BU repository
• Davenport, P., Noroozi, S., Sewell, P. and Zahedi, S., 2016. Applying ensemble neural networks to an inverse problem solution to prosthetic socket pressure measurement. 1st International Conference on Multidisciplinary Engineering Design Optimization, MEDO 2016.
  • more information
  • view in BU repository
• Hawkins, J., Noroozi, S., Dupac, M. and Sewell, P., 2015. An Investigation of the Ground Contact Point and Sagittal Plane Displacement of Energy Storage and Return (ESR) Composite Lower-Limb Prosthetic Feet during Running. In: International Society for Prosthetics & Orthotics (ISPO) World Congress 2015 22-25 June 2015 Lyon, France. Abstract Book - ISPO World Congress 2015, 18.
  • more information
• Davenport, P., Noroozi, S., Sewell, P. and Zahedi, S., 2015. A proposed system for automatic categorisation of lower-limb prosthesis alignment using Learning Vector Quantisation and an inverse problem pressure measurement approach. In: International Society for Prosthetics & Orthotics (ISPO) World Congress 2015 22-25 June 2015 Lyon, France.
  • more information
• Rahman, A.G.A., Yee, K.S., Ismail, Z., Tong, C.W. and Noroozi, S., 2014. Impact force identification by using modal transformation method for automobile test Rig. Applied Mechanics and Materials, 471, 102-106.
  • more information
  • view in BU repository
• Breen, A., Dupac, M., Noroozi, S. and Osborne, N., 2014. A pre-operational study magnification measurement and error estimation of residual tibia kinematics within below knee prosthetics. Engineering Optimization IV - Proceedings of the 4th International Conference on Engineering Optimization, ENGOPT 2014, 927-930.
  • more information
• Yee, K.S., Chao, O.Z., Kuan, K.K., Ismail, Z., Tong, C.W., Noroozi, S. and Rahman, A.G.A., 2014. Importance of selecting a suitable analysisfrequency range in impact force identification for automobile test rig. Applied Mechanics and Materials, 663, 88-92.
  • more information
  • view in BU repository
• Rahman, A.G.A., Ismail, Z., Noroozi, S. and Chao, O.Z., 2013. Impact-synchronous modal analysis (ISMA) - An attempt to find an alternative. 5th International Operational Modal Analysis Conference, IOMAC 2013, 1-8.
  • more information
• Romouzy Ali, A.M., Noroozi, S., Sewell, P. and Humphries-Smith, T., 2012. The Barriers Hindering Rapid Prototyping Deployment within Small and Medium-Sized Enterprises: Which Should Come First? In: Twelfth International Conference on Knowledge, Culture and Change Management 6-8 July 2012 Chicago, USA.
  • more information
• Noroozi, S., Rahman, A.G.A., Dupac, M. and Vinney, J.E., 2012. Dynamic characteristics of prosthetic feet: A comparison between modal parameters of walking, running and sprinting foot. Mechanisms and Machine Science, 8, 339-344.
  • more information
• Dupac, M. and Noroozi, S., 2012. Modeling and simulation of a slider crank mechanism with a flexible extensible link. Mechanisms and Machine Science, 8, 175-180.
  • more information
• Dyer, B.T.J., Noroozi, S., Sewell, P. and Redwood, S., 2010. An Argument for Assessing Lower-Limb Sprinting Prostheses Technology. In: 13th ISPO World Congress 10-15 May 2010 Leipzig, Germany.
  • more information
• Khandan, R., Noroozi, S., Sewell, P. and Vinney, J., 2010. Smart Passive Adaptive Control of Composite Plates. In: ASME 2010 International Mechanical Engineering Congress & Exposition 12-18 November 2010 Vancouver, British Columbia, Canada.
  • more information
• Khandan, R., Noroozi, S., Sewell, P. and Vinney, J., 2010. Optimum Design of Fibre Orientation Angles in Composite Laminate Plates for Minimum Thickness. In: ASME 2010 International Mechanical Engineering Congress & Exposition 12-18 November 2010 Vancouver, British Columbia, Canada.
  • more information
• Mousavi, A., Kalganova, T., Sandner-Kiesling, A., Flor, H., Cole, J., Noroozi, S., Zhang, J.J., Gilhooly, M., Gilbert, D. and Heiner, M., 2010. Phantom Limb Syndrome: An exploratory attempt to propose a VIrtual Personalised Solution to a Painful Problem. In: EMBC'10: 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society 31 August-4 September 2010 Buenos Aires Sheraton Hotel, Argentina. IEEE & EMB Engineering in Medicine and Biology Society.
  • more information
• Vali-Shariatpanahi, S., Noroozi, S. and Vinney, J., 2010. Evaluation of in-plane shear failure in composite laminate with high percentage of 90o plies. In: Hui, D., ed. 18th Annual International Conference on COMPOSITES/NANO ENGINEERING (ICCE -18) 4-10 July 2010 Anchorage, Alaska,USA,.
  • more information
  • view in BU repository
• Vali-Shariatpanahi, S., Jevons, M., Noroozi, S. and Vinney, J., 2008. Evaluation of Failure in Pin-Loaded Laminates. In: 49th AIAA/ASME/ASCE/AHS/ASC Structures Structural Dynamics, and Materials 7-10 April 2008 Schaumburg, Illinois, USA.
  • more information
• Vali-Shariatpanahi, S., Jevons, M., Noroozi, S. and Vinney, J., 2008. Evaluation of In-Plane Shear Failure in Composite Laminates. In: 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials 7-10 April 2008 Schaumburg, Illinois, USA.
  • more information
• Maheri, A., Noroozi, S., Toomer, C.A. and Vinney, J., 2006. Damping the Fluctuating Behaviour and Improving the Convergence Rate of the Axial Induction Factor in the BEMT-Based Rotor Aerodynamic Codes. In: Proceedings of the European Wind Energy Conference (EWEC2006) 27 February-2 March 2006 Athens, Greece. Brussels: EWEA.
  • more information
• Maheri, A., Noroozi, S., Toomer, C.A. and Vinney, J., 2006. A Simple Algorithm to Modify an Ordinary Wind Turbine Blade to an Adaptive One. In: Proceedings of the European Wind Energy Conference (EWEC2006) 27 February-2 March 2006 Athens, Greece. Brussels: EWEA.
  • more information
• Maheri, A., Noroozi, S., Toomer, C.A. and Vinney, J., 2006. Single Step Versus Coupled Aero-Structure Simulation of a Wind Turbine with Bend-Twist Adaptive Blades. In: Proceedings of the European Wind Energy Conference (EWEC2006) 27 February-2 March 2006 Athens, Greece. Brussels: EWEA.
  • more information
• Shrazi Kia, S., Noroozi, S., Carse, B. and Vinney, J., 2006. Failure Prediction in Composite Joints Using an Adaptive Neuro-Fuzzy Approach. In: Parmee, I.C., ed. Adaptive Computing in Design and Manufacture: Proceedings of the Seventh International Conference 25-27 April 2006 Bristol, UK. , 209-215 Institute for People-centred Computation (IP-CC).
  • more information
• Shrazi Kia, S., Noroozi, S., Carse, B., Vinney, J. and Rabbani, M., 2006. Application of Adaptive Neuro-Fuzzy System to Failure Prediction in Composite Joints. In: Kumar, U., Parida, A. and Rao, B.K.N., eds. Condition monitoring and diagnostic engineering management : (COMADEM 2006) : proceedings of the 19th international congress 12-15 June 2006 Luleå, Sweden. , 533-543 Luleå, Sweden: Luleå University of Technology.
  • more information
• Rabbani, M., Noroozi, S., Vinney, J., Shrazi Kia, S. and Rao, B.K.N., 2006. Inverse Identification of Load Using RBF Neural Network and Structural Response Data. In: Kumar, U. and Parida, A., eds. Condition monitoring and diagnostic engineering management : (COMADEM 2006) : proceedings of the 19th international congress 12-15 June 2006 Luleå, Sweden. , 435-444 Luleå, Sweden: Luleå University of Technology.
  • more information
• Noroozi, S., Sewell, P. and Vinney, J., 2006. The Application of a Hybrid Inverse Boundary Element Problem Engine for the Solution of Potential Problems. In: 7th International Conference on Boundary Element Techniques 4-6 September 2006 École Nationale des Ponts et Chaussées (ENPC) Paris, France.
  • more information
• Rabbani, M., Noroozi, S., Vinney, J. and Shrazi Kia, S., 2006. Genetic Algorithm-Trained RBF Neural Network for Load Identification. In: Amavasai, B.P., Siddique, N.H. and Cheng, X., eds. Proceedings of the IEEE Systems, Man and Cybernetics Society, United Kingdom & Republic of Ireland Chapter, 5th Conference on Advances in Cybernetic Systems : IEEE AICS2006 7-8 September 2006 Sheffield Hallam University. , 223-228 IEEE.
  • more information
• Behnia, M., Amali, R., Sewell, P., Vinney, J. and Noroozi, S., 2006. Application of Artificial Intelligence to Predict the Effect of Fertilizers on Saffron Production. In: 2nd International Symposium on Saffron Biology and Technology 28-30 October 2006 Mashhad, Iran.
  • more information
• Shrazi Kia, S., Noroozi, S., Carse, B., Vinney, J. and Rabbani, M., 2005. Investigation into Hybrid Data Mining and Soft Computing Techniques to Aid to Design Composite Joints. In: Educational Proceedings of Composites 26-30 September 2005 Columbus Convention Center, Columbus, Ohio.
  • more information
• Amali, R., Noroozi, S. and Vinney, J., 2002. A Hybrid Approach Using Photoelasticity, Finite Element Analysis and an Artificial Neural Network in Mechanical Engineering. In: Fifth International Conference on Adaptive Computing in Design and Manufacture (ACDM2002) 16-18 April 2002 University of Exeter, England.
  • more information
• Amali, R., Noroozi, S., Vinney, J., Sewell, P. and Andrews, S., 2002. A Novel Approach for Predicting Interfacial Pressure Between a Prosthetic Socket and a Residual Limb. In: Annual Reception at the House of Commons for Britain's Younger Engineers from UK University, Industrial and Public Sector Laboratories 9 December 2002 London, England.
  • more information
• Andrews, S., Noroozi, S., Sewell, P. and Vinney, J., 2001. A Novel Transducer to Aid the Assessment of Prosthetic Socket Fit. In: Seventh Annual Conference of the British Association of Prosthetists and Orthotists 6-8 April 2001 Nottingham, England.
  • more information
• Andrews, S., Noroozi, S., Vinney, J., Amali, R. and Sewell, P., 2001. A Novel Approach to Assess Prosthetic Socket Fit Based on Combining Experimental and Empirical Techniques. In: Hughes, J. and Jacobs, N.A., eds. Proceedings of the 10th World Congress of the International Society for Prosthetics and Orthotics (ISPO 2001) 1-6 July 2001 Glasgow, Scotland. International Society for Prosthetics and Orthotics.
  • more information
• Amali, R., Noroozi, S., Vinney, J., Sewell, P. and Andrews, S., 2001. A Novel Approach for Assessing Interfacial Pressure Between the Prosthetic Socket and the Residual Limb for Below Knee Amputees using Artificial Neural Networks. In: IJCNN '01. International Joint Conference on Neural Networks 15-19 July 2001 Washington, DC. , 2689-2693 Washington DC, USA: IEEE Press.
  • more information
• Sewell, P., Noroozi, S., Vinney, J. and Andrews, S., 2000. A Tool to Aid Below-Knee Prosthetic Socket Fitting. In: Special Reception in 2000 for Britain's Younger Engineers 4 December 2000 The House of Commons, London.
  • more information
• Vinney, J. and Noroozi, S., 2000. Simulation to Stimulation: A Virtual Approach. In: Harris, R.G. and Mulroy, T.J., eds. 3rd Working Conference on Engineering Education for the 21st century 17-20 April 2000 Sheffield University, England. Sheffield: SHU Press.
  • more information
• Noroozi, S., Vinney, J., Sewell, P. and Al-Rawe, A., 2000. An Empirical Model of the Structural Characteristics of Un-ribbed Cylindrical GRP Tanks. In: Horváth, I., Medland, A.J. and Vergeest, J.S.M., eds. TMCE 2000 Third international symposium on tools and methods of competitive engineering 18-21 April 2000 Delft University. , 571-580 Delft, The Netherlands: Delft University Press.
  • more information
• Noroozi, S., Vinney, J., Xu, G. and Littlefair, G., 2000. A Hybrid ANN and FEA Approach for Potential Problems. In: Horváth, I., Medland, A.J. and Vergeest, J.S.M., eds. TMCE 2000 Third international symposium on tools and methods of competitive engineering 18-21 April 2000 Delft University. , 821-826 Delft: Delft University Press.
  • more information
• Amali, R., Noroozi, S. and Vinney, J., 2000. The Application of Combined Artificial Neural Network and Finite Element Method in Domain Problems. In: Proceedings of the Sixth International Conference on Engineering Applications of Neural Networks (EANN 2000) 17-19 July 2000 Kingston University, England. , 1-7.
  • more information
• Noroozi, S., Vinney, J. and Cardew, G., 2000. Curvilinear Anisotropy: Theory and Application. In: DeWilde, W.P., Blain, W.R. and Brebbia, C.A., eds. 7th International Conference of Computer Methods in Composite Materials and Structures (CADCOMP 2000) 13-15 September 2000 Bologna, Italy. , 259-268 Southampton: WIT Press.
  • more information
• Noroozi, S., Sewell, P., Vinney, J. and Andrews, S., 2000. Introduction of a Novel Tool for Real-Time Monitoring and Assessment of Prosthetic Socket Fit. In: Pusey, H.C. and Rao, R.B.K.N., eds. Condition monitoring and diagnostic engineering management : COMADEM 2000 : proceedings of the 13th International Congress. 3-8 December 2000 Houston, Texas, USA. , 597-605 Elsevier.
  • more information
• Noroozi, S., Vinney, J., Unger, T. and Hope, A.D., 1999. Application of Adaptable Sensor Priorities in a Condition Monitoring System. In: McIntyre, J.D. and Rao, R.B.K.N., eds. Condition Monitoring and Diagnostic Engineering Management (Comadem '99) 6-9 July 1999 University of Sunderland. Kingham: Coxmoor Publishing.
  • more information
• Noroozi, S., Vinney, J., Wait, D. and Sewell, P., 1999. The Use of Boundary Element Analysis as a Design Aid to Analyse Complex Aspects of Aircraft Landing Gear Joint Design. In: 1st International Conference in Boundary Element Techniques July 1999 Queen Mary College, London. , 425-436.
  • more information
• Noroozi, S., Vinney, J. and Sewell, P., 1999. The Application of Redundant Industrial Robots In Bio-Mechanical Engineering. In: Advanced Robotics Development Conference on Medical Robotics 23-24 September 1999 Pisa, Italy.
  • more information
• Wang, L., Hope, A.D., Sadek, H. and Noroozi, S., 1999. Vibration monitoring for pumps in waste water industry. COMADEM '99, PROCEEDINGS, 69-75.
  • more information
• HOPE, A.D., NOROOZI, S. and UNGER, T., 1995. Intelligent monitoring systems for manufacturing industry. LASER METROLOGY AND MACHINE PERFORMANCE II, 261-266.
  • more information

Reports

• Sewell, P., Vinney, J. and Noroozi, S., 2005. New methods to improve the assessment, analysis and quality of prosthetic socket fit (Remedi Research Report). University of the West of England, Bristol. Available from: http://www.remedi.org.uk/past_major_awards.htm.
  • more information

PhD Students

• Samira Al-Nasser, 2024. Design Validation of a Novel Intraoperative Load Sensor for Total Knee Replacements, (In progress)
• Abdul Aziz Alsalal
• Ahmed Alumi
• Ahmed Ramouzi Ali
• Alex Breen
• Ali Alquraini
• Ali Maheri
• Bryce Dyer
• Elizabeth Craig
• G. XU
• Holley Chinnery
• Ivan Othekniko
• James Hawkins
• K. Baker
• Karem Abueda
• L. Yuanlong
• Lawrence Marcham
• Ling Wang
• Maryan Alianti
• Mohammad Ramazani
• Navid Aslani
• O. Al Rawi
• Phili Davenport
• Philip Davenport
• Philip Sewell
• Q Wang
• Ramin Amali
• Rasoul Khandan
• S. Hong
• Sepideh Vali Shariat Panahi
• Shima Kia
• Shima Kia
• T. Unger
• Thomas Unger
• Tim Reynolds

Profile of Teaching PG

• MEng Technology Transfer

Profile of Teaching UG

• Level-2 BEng/BA Engineering simulation
• Level-2 MEng Mechanical Design Application

Invited Lectures

• COMADIT, Human motion & Dyanamics Monitoring, WCCA London, 15 May 2017 more
  

  Conference organisation
• 01 Jan 2016 more
  

  University of Malaya

Grants

• Design Validation of Human Joint Transducers Artefacts to aid Orthopaedic Surgeries (Zimmer BioMet, 01 Mar 2021). Awarded
• Research Collaboration with University of Malaya. (Royal Academy of Engineers, 01 Mar 2016). In Progress
• Software hardware interface using virtual instrument. (Precision Acoustics Ltd., 01 Jul 2015). Awarded
• Valve Control Theory and system design and analysis (Hydreco LTD. POOLE, Dorset, 01 Jan 2015). Awarded
• Design, simulation and development a distributed control valve system. (Hydreco LTD. POOLE, Dorset, 01 Jan 2015). Awarded
• Investigating the ideal Deltoid Tension in Reverse Shoulder Replacements (Royal Bournemouth NHS hospital and Bournemouth University, 15 Jan 2014). Awarded
• Gait analysis after total knee replacement for performance assessment. (LIMA corp. Italy., 01 Jan 2014). Awarded
• Kinematics of the below-knee prosthesis: a study of the femoral-tibial-prosthesis kinetic chain and its relevance to low back pain (Anglo-European College of Chiropractic (AECC) and Bournemouth University, 05 Jun 2012). Awarded
• Investigation to Improve Lower-Limb Amputee Prosthesis Fit through the Design of an Intelligent Socket (EPSRC / Chas A Blatchfords and Sons, LTD., 01 Sep 2010). Awarded

External Responsibilities

• MDPI Sensors, Special Issue Editor (2024-), https://www.mdpi.com/journal/sensors/special_issues/49EZZ0H5V3; Advanced Sensors in Biomechanics and Rehabilitation Applications
• BINDT, Fellow of the BInst-NDT (2020-)

Qualifications

• PhD in Coupled Finite Element & Boundary Element methods (Sheffield University, 1988)
• MEng in Stress Vibration and Design (Sheffiled University, 1981)

Memberships

• CEng, Chartered Engineer, Member (1994-),
• Institute of Engineering Technology (The IET), Member (1994-), http://www.theiet.org/membership/